The u-boot.elf from the BSP


Has system.dtb embedded into it.

When building from bitbake how can this be configured so my u-boot.elf contains 
the dtb and I don't have to lug around two files?

The sample provided for booting a RAMDISK contains two files BOOT.BIN and 
image.ub.  I can successfully get to this only using the u-boot.elf from the 
pre-built otherwise I have to also load system.dtb to my SD Card.  So 
understanding how to build it into the u-boot.elf from bitbake would be nicer.



The contents of this e-mail and any attachment(s) are confidential and intended 
for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information 
could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in 
transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on 
the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the 
author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, 
dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written 
consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please 
delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and 
other defects.


meta-xilinx mailing list

Reply via email to