I'm seeing this on a custom zynq board with Linux-yocto-4.8. Nathan Rossi confirmed he could dupe this on a zybo. Booting mainline with the multi_v7... config works though. Furthering moving around suggests linux-yocto-48 will work, if we can figure out the magic kernel config option.
Anyone see this? Any suggestions where to look? Nothing obvious jumps out by inspection. Philip [ 6568.222913] mmc0: Timeout waiting for hardware interrupt. [ 6568.228268] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 6568.234084] sdhci: Sys addr: 0x00036a00 | Version: 0x00008901 [ 6568.239899] sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000001 [ 6568.245714] sdhci: Argument: 0x0000af05 | Trn mode: 0x00000013 [ 6568.251530] sdhci: Present: 0x01ff0202 | Host ctl: 0x00000017 [ 6568.257345] sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 6568.263161] sdhci: Wake-up: 0x00000000 | Clock: 0x00000207 [ 6568.268976] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 6568.274793] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 6568.280607] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 6568.286423] sdhci: Caps: 0x69ec0080 | Caps_1: 0x00000000 [ 6568.292239] sdhci: Cmd: 0x0000113a | Max curr: 0x00000001 [ 6568.298053] sdhci: Host ctl2: 0x00000000 [ 6568.301957] sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x2e403208 [ 6568.307775] sdhci: =========================================== [ 6568.315732] mmcblk0: error -110 transferring data, sector 44805, nr 3, cmd response 0x900, card status 0x0 -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
