Hi, Back in November I built core-image-minimal from Yocto master with meta-xilinx included.
I have the following files in deploy/images/zcu102-zynqmps: -rw-r--r-- 2 hutch hutch 24640 Nov 16 01:05 bl31-zcu102-zynqmp.bin -rw-r--r-- 2 hutch hutch 71688 Nov 16 01:05 bl31-zcu102-zynqmp.elf -rw-r--r-- 1 hutch hutch 1298 Nov 16 01:05 core-image-ion-e-zcu102-zynqmp-20161116050028.qemuboot.conf -rw-r--r-- 1 hutch hutch 1298 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp-20161117223156.qemuboot.conf -rw-r--r-- 2 hutch hutch 4839 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp-20161117223156.rootfs.manifest -rw-r--r-- 2 hutch hutch 23714041 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp-20161117223156.rootfs.tar.bz2 lrwxrwxrwx 2 hutch hutch 61 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp.manifest -> core-image-ion-e-zcu102-zynqmp-20161117223156.rootfs.manifest lrwxrwxrwx 1 hutch hutch 59 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp.qemuboot.conf -> core-image-ion-e-zcu102-zynqmp-20161117223156.qemuboot.conf lrwxrwxrwx 2 hutch hutch 60 Nov 17 17:38 core-image-ion-e-zcu102-zynqmp.tar.bz2 -> core-image-ion-e-zcu102-zynqmp-20161117223156.rootfs.tar.bz2 lrwxrwxrwx 2 hutch hutch 69 Nov 16 01:03 Image -> Image--4.4-xilinx+git0+dfb97bc345-r0-zcu102-zynqmp-20161116050028.bin -rw-r--r-- 2 hutch hutch 11590144 Nov 16 01:03 Image--4.4-xilinx+git0+dfb97bc345-r0-zcu102-zynqmp-20161116050028.bin -rw-r--r-- 2 hutch hutch 29025 Nov 16 01:03 Image--4.4-xilinx+git0+dfb97bc345-r0-zynqmp-zcu102-revB-20161116050028.dtb lrwxrwxrwx 2 hutch hutch 69 Nov 16 01:03 Image-zcu102-zynqmp.bin -> Image--4.4-xilinx+git0+dfb97bc345-r0-zcu102-zynqmp-20161116050028.bin lrwxrwxrwx 2 hutch hutch 74 Nov 16 01:03 Image-zynqmp-zcu102-revB.dtb -> Image--4.4-xilinx+git0+dfb97bc345-r0-zynqmp-zcu102-revB-20161116050028.dtb -rw-rw-r-- 2 hutch hutch 13868335 Nov 16 01:03 modules--4.4-xilinx+git0+dfb97bc345-r0-zcu102-zynqmp-20161116050028.tgz lrwxrwxrwx 2 hutch hutch 71 Nov 16 01:03 modules-zcu102-zynqmp.tgz -> modules--4.4-xilinx+git0+dfb97bc345-r0-zcu102-zynqmp-20161116050028.tgz drwxr-xr-x 2 hutch hutch 4096 Nov 16 01:05 qemu-hw-devicetrees -rw-r--r-- 2 hutch hutch 294 Nov 17 17:37 README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt lrwxrwxrwx 2 hutch hutch 65 Nov 16 01:04 u-boot.bin -> u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.bin lrwxrwxrwx 2 hutch hutch 65 Nov 16 01:04 u-boot.elf -> u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.elf lrwxrwxrwx 2 hutch hutch 65 Nov 16 01:04 u-boot-zcu102-zynqmp.bin -> u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.bin lrwxrwxrwx 2 hutch hutch 65 Nov 16 01:04 u-boot-zcu102-zynqmp.elf -> u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.elf -rw-r--r-- 2 hutch hutch 503376 Nov 16 01:04 u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.bin -rw-r--r-- 2 hutch hutch 569704 Nov 16 01:04 u-boot-zcu102-zynqmp-v2016.01-xilinx+gitAUTOINC+0daf88c7f8-r0.elf I've been reading in the meta-xilinx archives to see if I could figure out how to use these images to create a SD card to boot the board but I'm kind of lost. I read some things that suggested u-boot spl support for this board was only in v2016.7 so do I need to change my configs to use that so I get a boot.bin file??? I've built images with meta-xilinx before for the zedboard and was able to boot from SD but this zcu102 images that were generated I'm not familiar with what to do with them ... which ones to copy to SD card ... what the SD card names should be etc. I see there is now a meta-petalinux ... should I be using that instead of meta-xilinx? My understanding is petalinux has a fixed Linaro toolchain and some of the SDK tools but I'm not aware of any pro's/con's to using that layer vs meta-xilinx. Anyone have a zcu102 booting from SD card with these images??? Thanks! Regards, Brian -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
