Hi, I have built core-image-minimal from Morty branches of poky and meta-xilinx, build completes withoiut issue (providing I remove ATF from image extra dependsdue to the binutils issue). I then do a runqemu zcu102-zynqmp whuich produces the following output and no more. I can get back to the QEMU console no qemu is still running OK. I have read in other places that this problem has been seen before when booting without u-boot, is this the same or a new problem?
peter@peter-VirtualBox:/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build$ runqemu zcu102-zynqmp runqemu - INFO - Assuming MACHINE = zcu102-zynqmp runqemu - INFO - Running MACHINE=zcu102-zynqmp bitbake -e... runqemu - INFO - MACHINE: zcu102-zynqmp runqemu - INFO - DEPLOY_DIR_IMAGE: /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp runqemu - INFO - Running ls -t /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/*.qemuboot.conf... runqemu - INFO - CONFFILE: /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114175046.qemuboot.conf runqemu - INFO - Continuing with the following parameters: KERNEL: [/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image] DTB: [/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb] MACHINE: [zcu102-zynqmp] FSTYPE: [cpio] ROOTFS: [/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114201401.rootfs.cpio] CONFFILE: [/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114175046.qemuboot.conf] runqemu - INFO - Running /sbin/ip link... runqemu - INFO - Setting up tap interface under sudo [sudo] password for peter: runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock... runqemu - INFO - Created tap: tap0 runqemu - INFO - Running ldd /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64... runqemu - INFO - Running /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -net nic -net nic -net nic -net nic,netdev=net0,macaddr=52:54:00:12:34:02 -machine xlnx-zcu102 -m 2048 -initrd /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114201401.rootfs.cpio -nographic -serial mon:stdio -serial null -kernel /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image -append 'root=/dev/ram0 rw debugshell mem=2048M ip=192.168.7.2: :192.168.7.1:255.255.255.0 console=ttyPS0,115200 earlyprintk' -dtb /media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb Warning: vlan 0 is not connected to host network -- Best Regards Peter
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
