Sorry Manju but I'm confused.
I know that link, I used it to configure my local.conf.
Here is my config:
#################
# Xilinx specific
#################
XILINX_SDK_TOOLCHAIN = "/opt/Xilinx/SDK/2016.4"
XILINX_VER_MAIN = "2016.4"
#Path to hdf file: ex: HDF_PATH = "/home/user/system.hdf"
HDF_BASE = "file://"
HDF_PATH = "/home/sebo/system.hdf"
#add Boot.bin dependency
IMAGE_CLASSES += " xilinx-bootbin"
#specify BIF partition attributes required for BOOT.bin
BIF_PARTITION_ATTR= "fsbl u-boot"
#specify BIF partition attributes for FSBL
#bootloader is FSBL. Location where FSBL binary is present and dependency
to build FSBL
BIF_PARTITION_IMAGE[fsbl]="${DEPLOY_DIR_IMAGE}/fsbl-${MACHINE}.elf"
BIF_PARTITION_DEPENDS[fsbl]="virtual/fsbl"
#specify BIF partition attributes for u-boot
#Location where u-boot binary is present
BIF_PARTITION_IMAGE[u-boot]="${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.elf"
Now, I don't understand what's wrong with my command. Prior to run this
command, the boot.bin was not produced.
Thanks.
/S
-- Sébastien
On Thu, Apr 20, 2017 at 10:50 PM, Manjukumar Harthikote Matha <
[email protected]> wrote:
>
>
> From: Sébastien bouché [mailto:[email protected]]
> Sent: Thursday, April 20, 2017 1:44 PM
> To: Manjukumar Harthikote Matha
> Cc: [email protected]
> Subject: Re: [meta-xilinx] FSBL & BOOT.bin
>
> Hi Manju,
> Here is the command line I've used:
> bitbake linux-xlnx u-boot-xlnx
>
> Hi,
>
> I think you are mixing between u-boot-spl and meta-xilinx-tools fsbl.
> u-boot-spl is alternate to fsbl.
>
> Using meta-xilinx-tools to generate boot.bin is documented here
> http://www.wiki.xilinx.com/Using+meta-xilinx-tools+layer
>
>
> Thanks
> Manju
>
>
> Thanks for your help,
> S/
>
>
> -- Sébastien
>
> On Thu, Apr 20, 2017 at 10:35 PM, Manjukumar Harthikote Matha <
> [email protected]> wrote:
>
>
> From: [email protected] [mailto:meta-xilinx-bounces@
> yoctoproject.org] On Behalf Of Sébastien bouché
> Sent: Thursday, April 20, 2017 12:17 PM
> To: [email protected]
> Subject: [meta-xilinx] FSBL & BOOT.bin
>
> Hello,
> I'm currently working on a Yocto project (krogoth) using the meta-xilinx
> and meta-xilnx-tools.
> I've successfully built an image and flashed my board (zynqberry from
> Trenz).
> However, the fsbl-zynqberry.elf and the resulting boot.bin are wrong.
>
> Hi,
>
> Can you share details on how you generated the boot.bin? was it using
> meta-xilinx-tools or other methodlogy
>
> Thanks
> Manju
>
>
> Although, I do provide the hdf file to layer.conf
> and these settings:
>
> #specify BIF partition attributes for FSBL
> #bootloader is FSBL. Location where FSBL binary is present and dependency
> to build FSBL
> BIF_PARTITION_IMAGE[fsbl]="${DEPLOY_DIR_IMAGE}/fsbl-${MACHINE}.elf"
> BIF_PARTITION_DEPENDS[fsbl]="virtual/fsbl"
> I do use an extra layer found on github to support the zynberry.
>
> I had to use this procedure on the Xilinx Wiki to solve the issue.
>
> Moreover, how to include the bitfile at this stage?
>
> Thanks for any help here.
>
> -- Sébastien
>
>
> This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be
> proprietary, privileged or copyrighted under applicable law. If you are not
> the intended recipient, do not read, copy, or forward this email message or
> any attachments. Delete this email message and any attachments immediately.
>
>
>
> This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be
> proprietary, privileged or copyrighted under applicable law. If you are not
> the intended recipient, do not read, copy, or forward this email message or
> any attachments. Delete this email message and any attachments immediately.
>
>
--
_______________________________________________
meta-xilinx mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-xilinx
