On Thu, Apr 20, 2017 at 3:35 AM, Nathan Rossi <[email protected]> wrote: > Fix up the indent for nested bullet lists. > > Signed-off-by: Nathan Rossi <[email protected]>
Reviewed-by: Alistair Francis <[email protected]> Thanks, Alistair > --- > README.booting.md | 29 +++++++++++++++++------------ > README.md | 12 +++++++----- > 2 files changed, 24 insertions(+), 17 deletions(-) > > diff --git a/README.booting.md b/README.booting.md > index a22ddb7bd3..f1ff39d550 100644 > --- a/README.booting.md > +++ b/README.booting.md > @@ -3,7 +3,8 @@ Booting meta-xilinx boards > > Contents > -------- > - * [Loading via JTAG](#loading-via-jtag) > + > +* [Loading via JTAG](#loading-via-jtag) > * [XSDB](#xsdb) > * [Load Bitstream](#load-bitstream) > * [Load U-Boot (MicroBlaze)](#load-u-boot-microblaze) > @@ -11,14 +12,14 @@ Contents > * [U-Boot Console](#u-boot-console) > * [Kernel, Root Filesystem and Device > Tree](#kernel-root-filesystem-and-device-tree) > * [Booting via U-Boot](#booting-via-u-boot) > - * [Loading via SD](#loading-via-sd) > +* [Loading via SD](#loading-via-sd) > * [Preparing SD/MMC](#preparing-sdmmc) > * [Installing U-Boot](#installing-u-boot) > * [Installing Kernel and Device Tree](#installing-kernel-and-device-tree) > * [Installing Root Filesystem](#installing-root-filesystem) > * [U-Boot Configuration File](#u-boot-configuration-file) > * [Booting](#booting) > - * [Loading via TFTP](#loading-via-tftp) > +* [Loading via TFTP](#loading-via-tftp) > * [Kernel, Root Filesystem and Device > Tree](#kernel-root-filesystem-and-device-tree-1) > * [Booting via U-Boot](#booting-via-u-boot-1) > > @@ -143,19 +144,22 @@ how large the ramdisk is. > > ### Installing U-Boot > Add the following files to the first partition: > - * `boot.bin` > - * `u-boot.img` (if using u-boot-xlnx) > - * `u-boot-dtb.img` (if using u-boot) > + > +* `boot.bin` > +* `u-boot.img` (if using u-boot-xlnx) > +* `u-boot-dtb.img` (if using u-boot) > > ### Installing Kernel and Device Tree > Add the following files to the first partition: > - * `uImage` > - * `<machine name>.dtb` > + > +* `uImage` > +* `<machine name>.dtb` > > ### Installing Root Filesystem > If using a ramdisk also add the `.cpio.gz.u-boot` type of root filesystem > image > to the first partition. > - * `core-image-minimal-<machine name>.cpio.gz.u-boot` > + > +* `core-image-minimal-<machine name>.cpio.gz.u-boot` > > If using the SD card as the root filesystem, populate the second partition > with > the content of the root filesystem. To install the root filesystem extract > the > @@ -198,9 +202,10 @@ Boot your system into U-Boot, using one of boot methods > (e.g. JTAG, SD, QSPI). > > ### Kernel, Root Filesystem and Device Tree > Place the following images into the root of the TFTP server directory: > - * `core-image-minimal-<machine name>.cpio.gz.u-boot` > - * `uImage` (Zynq) or `linux.bin.ub` (MicroBlaze) > - * `<machine name>.dtb` > + > +* `core-image-minimal-<machine name>.cpio.gz.u-boot` > +* `uImage` (Zynq) or `linux.bin.ub` (MicroBlaze) > +* `<machine name>.dtb` > > ### Booting via U-Boot > The serial console of the target board will display the U-Boot console. > diff --git a/README.md b/README.md > index c3fc60682e..eef021428f 100644 > --- a/README.md > +++ b/README.md > @@ -4,18 +4,20 @@ meta-xilinx > This layer provides support for MicroBlaze, Zynq and ZynqMP. > > Additional documentation: > - * [Building](README.building.md) > - * [Booting](README.booting.md) > + > +* [Building](README.building.md) > +* [Booting](README.booting.md) > > Supported Boards/Machines > ========================= > > Boards/Machines supported by this layer: > - * MicroBlaze: > + > +* MicroBlaze: > * [Xilinx ML605 (QEMU)](conf/machine/ml605-qemu-microblazeel.conf) - > `ml605-qemu-microblazeel` (QEMU support) > * [Xilinx S3A DSP 1800 > (QEMU)](conf/machine/s3adsp1800-qemu-microblazeeb.conf) - > `s3adsp1800-qemu-microblazeeb` (QEMU support) > * [Xilinx KC705](conf/machine/kc705-microblazeel.conf) - > `kc705-microblazeel` > - * Zynq: > +* Zynq: > * [Zynq (QEMU)](conf/machine/qemu-zynq7.conf) - `qemu-zynq7` (QEMU Support) > * [Xilinx ZC702](conf/machine/zc702-zynq7.conf) - `zc702-zynq7` > * [Xilinx ZC706](conf/machine/zc706-zynq7.conf) - `zc706-zynq7` > @@ -24,7 +26,7 @@ Boards/Machines supported by this layer: > * [Avnet/Digilent ZedBoard](conf/machine/zedboard-zynq7.conf) - > `zedboard-zynq7` > * [Digilent Zybo](conf/machine/zybo-zynq7.conf) - `zybo-zynq7` > * [Digilent Zybo Linux BD](conf/machine/zybo-linux-bd-zynq7.conf) - > `zybo-linux-bd-zynq7` > - * ZynqMP: > +* ZynqMP: > * [Xilinx EP108](conf/machine/ep108-zynqmp.conf) - `ep108-zynqmp` (QEMU > support) > * [Xilinx ZCU102](conf/machine/zcu102-zynqmp.conf) - `zcu102-zynqmp` (QEMU > support) > > -- > 2.11.0 > > -- > _______________________________________________ > meta-xilinx mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-xilinx -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
