Hi, Please, can someone explain me to to configure a custom machine by using the HDF config process ?
I'm using 2016.4 (xilinx tools and meta-xilinx) It seems there is not enough explanations on page http://www.wiki.xilinx.com/Using+meta-xilinx-tools+layer In a custom zybotg-zynq7.conf file I write HDF_BASE = "file://" HDF_PATH = "/home/mancini/CSUG/SLE_Atise/vdma_zybo/csug.sdk/zybo_system_wrapper.hdf" but I have the following error bitbake core-image-minimal [snip] | ERROR: Function failed: do_compile (log file is located at /home/mancini/Zybo/PetaLinux/2016.4/build/tmp/work/zybotpg_zynq7-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.28081) | make[3]: *** No rule to make target 'arch/arm/boot/dts/zybo_system_wrapper.dtb'. Stop. It seems the zybo_system_wrapper.dtb is not produced. Please, can someone can tell me how to configure the hdf ? Best regards Stéphane Mancini -- |Stéphane Mancini Maitre de Conférences | Grenoble-INP Ensimag/TIMA SLS | Tel : +33 4 76 57 43 58 | TIMA Laboratory | 46, Av Félix Viallet, 38031 Grenoble Cedex | Email : [email protected] | http://tima.imag.fr ================================================ Join us for the DASIP Conference Visit http://www.ecsi.org/dasip/ ================================================ -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
