On 27 May 2017 at 08:07, Manjukumar Harthikote Matha <[email protected]> wrote: > > >> -----Original Message----- >> From: [email protected] [mailto:meta-xilinx- >> [email protected]] On Behalf Of Nathan Rossi >> Sent: Monday, May 15, 2017 6:21 AM >> To: [email protected] >> Subject: [meta-xilinx] [PATCH] *-zynq7: Change some boards to mainline >> U-Boot by >> default >> >> Change the microzed-zynq7, picozed-zynq7, zedboard-zynq7 and zybo-zynq7 >> machines to use the mainline U-Boot by default. >> >> All these machines can be supported by the mainline U-Boot and do not >> require any of the drivers/features that are only provided in the Xilinx >> vendor tree (u-boot-xlnx). >> >> Signed-off-by: Nathan Rossi <[email protected]> >> --- >> conf/machine/microzed-zynq7.conf | 1 + >> conf/machine/picozed-zynq7.conf | 1 + >> conf/machine/zedboard-zynq7.conf | 1 + >> conf/machine/zybo-zynq7.conf | 1 + >> 4 files changed, 4 insertions(+) >> >> diff --git a/conf/machine/microzed-zynq7.conf b/conf/machine/microzed- >> zynq7.conf >> index ec28c3ffbf..aaca1ca8d9 100644 >> --- a/conf/machine/microzed-zynq7.conf >> +++ b/conf/machine/microzed-zynq7.conf >> @@ -9,6 +9,7 @@ require conf/machine/include/machine-xilinx-board.inc >> MACHINE_FEATURES = "ext2 vfat usbhost" >> >> # u-boot configuration >> +PREFERRED_PROVIDER_virtual/bootloader = "u-boot" >> UBOOT_MACHINE = "zynq_microzed_config" >> SPL_BINARY = "spl/boot.bin" >> >> diff --git a/conf/machine/picozed-zynq7.conf >> b/conf/machine/picozed-zynq7.conf >> index 2fb310b97c..9f8a37e884 100644 >> --- a/conf/machine/picozed-zynq7.conf >> +++ b/conf/machine/picozed-zynq7.conf >> @@ -13,6 +13,7 @@ require conf/machine/include/machine-xilinx-board.inc >> MACHINE_FEATURES = "ext2 vfat usbhost usbgadget" >> >> # u-boot configuration >> +PREFERRED_PROVIDER_virtual/bootloader = "u-boot" >> UBOOT_MACHINE = "zynq_picozed_config" >> SPL_BINARY = "spl/boot.bin" >> >> diff --git a/conf/machine/zedboard-zynq7.conf b/conf/machine/zedboard- >> zynq7.conf >> index 58cee372fd..a157eaf189 100644 >> --- a/conf/machine/zedboard-zynq7.conf >> +++ b/conf/machine/zedboard-zynq7.conf >> @@ -13,6 +13,7 @@ require conf/machine/include/machine-xilinx-default.inc >> require conf/machine/include/machine-xilinx-board.inc >> >> # u-boot configuration >> +PREFERRED_PROVIDER_virtual/bootloader = "u-boot" > > Can we leave this one out? This board is validated and in our regressions
Ok. I've updated and merged this patch now though. Regards, Nathan -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
