Hi Sandeep, The Linux host that I am using to build Yocto is Ubuntu 16.04.2 LTS.
I can't see any error describing what you seem in the log.do_compile file, anyway here there are both files: Thank you for helping, Best regards, Pello 2017-06-09 17:26 GMT+02:00 Sandeep Gundlupet Raju < [email protected]>: > Hi Pello, > > > > Also can you send below files. I suspect you have this error “mb-gcc: > error while loading shared libraries: libstdc++.so.6: wrong ELF class: > ELFCLASS64” in log.do_compile file. > > > > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/log.do_configure > > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/log.do_compile > > > > *Thanks,* > > *Sandeep* > > > > *From:* Sandeep G.R [mailto:[email protected]] > *Sent:* Friday, June 9, 2017 9:19 AM > *To:* Pello Heriz; Sandeep Gundlupet Raju > *Subject:* Re: [yocto] Problems to build xen-guest-image-minimal > > > > Hi Pello, > > > > Which Linux host are you using to build yocto? > > > *Thanks,* > > *Sandeep* > > > > On Fri, Jun 9, 2017 at 2:31 AM, Pello Heriz <[email protected]. > edu> wrote: > > Hi Sandeep, > > > > I have solved the problem in which I was stuck, anyway, now I'm having > another error: > > generalelectric@mlan11214m117linux:/opt/repo_yocto_GE/build$ bitbake > xen-guest-image-minimal > Loading cache: 100% |############################# > ###############################################################| Time: > 0:00:01 > Loaded 3232 entries from dependency cache. > Parsing recipes: 100% |############################# > #############################################################| Time: > 0:00:01 > Parsing of 2443 .bb files complete (2441 cached, 2 parsed). 3233 targets, > 224 skipped, 0 masked, 0 errors. > > > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.32.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "universal" > TARGET_SYS = "aarch64-xilinx-linux" > MACHINE = "zcu102-zynqmp" > DISTRO = "petalinux" > DISTRO_VERSION = "2017.1" > TUNE_FEATURES = "aarch64" > TARGET_FPU = "" > meta > meta-poky = "rel-v2017.1:b37e6d969f27d92ef8b323678598c4ad879243c3" > meta-perl > meta-systemd > meta-gpe > meta-python > meta-efl > meta-ruby > meta-filesystems > meta-gnome > meta-multimedia > meta-networking > meta-webserver > meta-xfce > meta-initramfs > meta-oe = "rel-v2017.1:1efa5d623bc64659b57389e50be2568b1355d5f7" > meta-linaro-toolchain = "rel-v2017.1:39860f6c7af0858981cc004bbe4f4c > 421f6be607" > meta-qt5 = "rel-v2017.1:50bf34517e3e2258e722ee9f40998c60f660caf6" > meta-xilinx = "rel-v2017.1:33014f8bdcbc89910880f9577d766cb32956c434" > meta-xilinx-tools = "rel-v2017.1:64847a5afcffcb73e4bcf2137911819b55537308" > meta-petalinux = "rel-v2017.1:931753a88efcaf0ef9bda76dfd0fe8c7119d1822" > meta-virtualization = "rel-v2017.1:610887495c01f0b17db6084e1426cc > 55a3f806ea" > meta-openamp = "rel-v2017.1:c92f1e072b1939172658a5f01a68197282342305" > > Initialising tasks: 100% |############################# > ##########################################################| Time: 0:00:09 > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > > ERROR: pmu-firmware-2017.1+gitAUTOINC+3813f14966-r0 do_deploy: Function > failed: do_deploy (log file is located at /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/pmu-firmware/2017.1+ > gitAUTOINC+3813f14966-r0/temp/log.do_deploy.14811) > ERROR: Logfile of failure stored in: /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/pmu-firmware/2017.1+ > gitAUTOINC+3813f14966-r0/temp/log.do_deploy.14811 > Log data follows: > | DEBUG: Executing python function sstate_task_prefunc > | DEBUG: Python function sstate_task_prefunc finished > | DEBUG: Executing shell function do_deploy > | install: cannot stat '/opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/pmu-firmware/2017.1+ > gitAUTOINC+3813f14966-r0/build/pmu-firmware/Release/pmu-firmware.elf': No > such file or directory > | WARNING: /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/run.do_deploy.14811:1 > exit 1 from 'install -m 0644 /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/pmu-firmware/2017.1+ > gitAUTOINC+3813f14966-r0/build/pmu-firmware/Release/pmu-firmware.elf > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/ > deploy-pmu-firmware/pmu-firmware-2017.1+gitAUTOINC+ > 3813f14966-r0-zcu102-zynqmp-20170609082331.elf' > | ERROR: Function failed: do_deploy (log file is located at > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/ > log.do_deploy.14811) > ERROR: Task (/opt/repo_yocto_GE/sources/core/../meta-xilinx-tools/ > recipes-bsp/pmu/pmu-firmware_git.bb:do_deploy) failed with exit code '1' > NOTE: Tasks Summary: Attempted 3009 tasks of which 3007 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > /opt/repo_yocto_GE/sources/core/../meta-xilinx-tools/ > recipes-bsp/pmu/pmu-firmware_git.bb:do_deploy > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > generalelectric@mlan11214m117linux:/opt/repo_yocto_GE/build$ gedit > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/ > log.do_deploy.14811 > > Can you please help me with this? > > Thanks, > > Pello > > > > 2017-06-08 8:32 GMT+02:00 Pello Heriz <[email protected]>: > > Hi Sandeep, > > thanks for helping, here you are the local.conf and bblayers.conf files, > > Regards, > > Pello > > > > 2017-06-07 19:01 GMT+02:00 Sandeep G.R <[email protected]>: > > Hi Pello, > > > > Can you send your local.conf I can take a look. FYI > http://www.wiki.xilinx.com/Xen+Hypervisor+through+Yocto+Flow > > > *Thanks,* > > *Sandeep* > > > > On Wed, Jun 7, 2017 at 12:38 AM, Pello Heriz < > [email protected]> wrote: > > Hi Sandeep, > > I have tried what you told me, but anyway I'm still having a compiling > issue. Here is the screenshot that shows the error: > > generalelectric@mlan11214m117linux:/opt/repo_yocto_GE/build$ bitbake > xen-guest-image-minimal > Parsing recipes: 100% |############################# > #############################################################| Time: > 0:03:02 > Parsing of 2443 .bb files complete (0 cached, 2443 parsed). 3233 targets, > 224 skipped, 0 masked, 0 errors. > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.32.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "universal" > TARGET_SYS = "aarch64-xilinx-linux" > MACHINE = "zcu102-zynqmp" > DISTRO = "petalinux" > DISTRO_VERSION = "2017.1" > TUNE_FEATURES = "aarch64" > TARGET_FPU = "" > meta > meta-poky = "rel-v2017.1:b37e6d969f27d92ef8b323678598c4ad879243c3" > meta-perl > meta-systemd > meta-gpe > meta-python > meta-efl > meta-ruby > meta-filesystems > meta-gnome > meta-multimedia > meta-networking > meta-webserver > meta-xfce > meta-initramfs > meta-oe = "rel-v2017.1:1efa5d623bc64659b57389e50be2568b1355d5f7" > meta-linaro-toolchain = "rel-v2017.1:39860f6c7af0858981cc004bbe4f4c > 421f6be607" > meta-qt5 = "rel-v2017.1:50bf34517e3e2258e722ee9f40998c60f660caf6" > meta-xilinx = "rel-v2017.1:33014f8bdcbc89910880f9577d766cb32956c434" > meta-xilinx-tools = "rel-v2017.1:64847a5afcffcb73e4bcf2137911819b55537308" > meta-petalinux = "rel-v2017.1:931753a88efcaf0ef9bda76dfd0fe8c7119d1822" > meta-virtualization = "rel-v2017.1:610887495c01f0b17db6084e1426cc > 55a3f806ea" > meta-openamp = "rel-v2017.1:c92f1e072b1939172658a5f01a68197282342305" > > Initialising tasks: 100% |############################# > ##########################################################| Time: 0:00:09 > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > ERROR: device-tree-generation-xilinx+gitAUTOINC+94fc615234-r0 > do_configure: Function failed: do_configure (log file is located at > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234- > r0/temp/log.do_configure.13481) > ERROR: Logfile of failure stored in: /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/device-tree-generation/ > xilinx+gitAUTOINC+94fc615234-r0/temp/log.do_configure.13481 > Log data follows: > | DEBUG: Executing python function sysroot_cleansstate > | DEBUG: Python function sysroot_cleansstate finished > | DEBUG: Executing shell function do_configure > | MISC_ARG is -yamlconf /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/device-tree-generation/ > xilinx+gitAUTOINC+94fc615234-r0/device-tree-generation.yaml > | APP_ARG is -app "device-tree" > | cmd is: xsct /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234-r0/dtgen.tcl > -ws /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234-r0/build -pname > device-tree-generation -rp /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/device-tree-generation/ > xilinx+gitAUTOINC+94fc615234-r0/git -processor psu_cortexa53_0 -hdf > /opt/repo_yocto_GE/build/tmp/deploy/images/zcu102-zynqmp/Xilinx-zcu102-zynqmp.hdf > -arch 64 -app "device-tree" -yamlconf /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/device-tree-generation/ > xilinx+gitAUTOINC+94fc615234-r0/device-tree-generation.yaml > | /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234- > r0/temp/run.do_configure.13481: line 122: xsct: command not found > | WARNING: /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234- > r0/temp/run.do_configure.13481:1 exit 127 from 'eval xsct > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234-r0/dtgen.tcl > -ws /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234-r0/build -pname > device-tree-generation -rp /opt/repo_yocto_GE/build/tmp/ > work/zcu102_zynqmp-xilinx-linux/device-tree-generation/ > xilinx+gitAUTOINC+94fc615234-r0/git -processor psu_cortexa53_0 -hdf > /opt/repo_yocto_GE/build/tmp/deploy/images/zcu102-zynqmp/Xilinx-zcu102-zynqmp.hdf > -arch 64 ${APP_ARG} ${MISC_ARG}' > | ERROR: Function failed: do_configure (log file is located at > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234- > r0/temp/log.do_configure.13481) > ERROR: Task (/opt/repo_yocto_GE/sources/core/../meta-xilinx-tools/ > recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 2715 tasks of which 2712 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > /opt/repo_yocto_GE/sources/core/../meta-xilinx-tools/ > recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > generalelectric@mlan11214m117linux:/opt/repo_yocto_GE/build$ gedit > /opt/repo_yocto_GE/build/tmp/work/zcu102_zynqmp-xilinx- > linux/device-tree-generation/xilinx+gitAUTOINC+94fc615234- > r0/temp/log.do_configure.13481 > generalelectric@mlan11214m117linux:/opt/repo_yocto_GE/build$ > > I don't know what is failing now. Can you please help me with this? > > Regards, > > Pello > > > > 2017-06-05 17:15 GMT+02:00 Sandeep G.R <[email protected]>: > > Hi Pello, > > > > You can use like this. > > > > repo init -u git://github.com/Xilinx/yocto-manifests.git -b rel-v2017.1 > > repo sync > > repo start rel-v2017.1 --all > > MACHINE=zcu102-zynqmp bitbake xen-image-minimal > > > > > *Thanks,* > > *Sandeep* > > > > On Mon, Jun 5, 2017 at 2:59 AM, Pello Heriz <[email protected]. > edu> wrote: > > How can I clone that release? > > > > Regards, > > Pello > > > > 2017-06-02 18:07 GMT+02:00 Sandeep G.R <[email protected]>: > > > > On Wed, May 31, 2017 at 10:13 AM, Khem Raj <[email protected]> wrote: > > > > On Wed, May 31, 2017 at 12:22 AM Pello Heriz < > [email protected]> wrote: > > Hi, > > I'm trying to build xen-guest-image-minimal with master branch of Yocto, > but I keep stuck in the next error: > > bitbake xen-guest-image-minimal > NOTE: /opt/yocto_GE/poky/meta-qt5/recipes-qt/qt5/qtbase_git.bb: > base_contains is deprecated, please use bb.utils.contains instead. > NOTE: /opt/yocto_GE/poky/meta-qt5/recipes-qt/qt5/qtbase_git.bb: > base_contains is deprecated, please use bb.utils.contains instead. > WARNING: /opt/yocto_GE/poky/meta-petalinux/recipes-external/ > external-xilinx-toolchain/libgcc-xilinx.bb: LICENSE_libgcov-dev includes > licenses (GPL-3.0) that are not listed in LICENSE > Parsing recipes: 100% |##########################################| Time: > 0:04:34 > Parsing of 2477 .bb files complete (0 cached, 2477 parsed). 3310 targets, > 312 skipped, 0 masked, 0 errors. > WARNING: No recipes available for: > /opt/yocto_GE/poky/meta-petalinux/recipes-devtools/ > python/python-smartpm_%.bbappend > WARNING: No bb files matched BBFILE_PATTERN_gpe-layer > '^/opt/yocto_GE/poky/meta-openembedded/meta-gpe/' > NOTE: Resolving any missing task queue dependencies > ERROR: Nothing PROVIDES 'rpmresolve-native'. Close matches: > meson-native > rpm-native > perl-native > ERROR: Required build target 'xen-guest-image-minimal' has no buildable > providers. > Missing or unbuildable dependency chain was: ['xen-guest-image-minimal', > 'rpmresolve-native'] > > > > It's possible that you do not have matching releases of various layers I > would first check that > > > > Yes master is not stable you need to clone rel-v2017.1 tag > > > > The bblayers that I have included to the project are the next ones: > > BBLAYERS ?= " \ > ${MY_META_DIR}/meta \ > ${MY_META_DIR}/meta-poky \ > ${MY_META_DIR}/meta-yocto-bsp \ > ${MY_META_DIR}/meta-openembedded/meta-perl \ > ${MY_META_DIR}/meta-openembedded/meta-systemd \ > ${MY_META_DIR}/meta-openembedded/meta-gpe \ > ${MY_META_DIR}/meta-openembedded/meta-python \ > ${MY_META_DIR}/meta-openembedded/meta-efl \ > ${MY_META_DIR}/meta-openembedded/meta-ruby \ > ${MY_META_DIR}/meta-openembedded/meta-filesystems \ > ${MY_META_DIR}/meta-openembedded/meta-gnome \ > ${MY_META_DIR}/meta-openembedded/meta-multimedia \ > ${MY_META_DIR}/meta-openembedded/meta-networking \ > ${MY_META_DIR}/meta-openembedded/meta-webserver \ > ${MY_META_DIR}/meta-openembedded/meta-xfce \ > ${MY_META_DIR}/meta-openembedded/meta-initramfs \ > ${MY_META_DIR}/meta-openembedded/meta-oe \ > ${MY_META_DIR}/meta-qt5 \ > ${MY_META_DIR}/meta-selftest \ > ${MY_META_DIR}/meta-skeleton \ > ${MY_META_DIR}/meta-xilinx \ > ${MY_META_DIR}/meta-xilinx-tools \ > ${MY_META_DIR}/meta-petalinux \ > ${MY_META_DIR}/meta-virtualization \ > ${MY_META_DIR}/meta-xzd \ > " > > > > How can I solve this issue? > > Regards, > > Pello > > > > > -- > _______________________________________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/yocto > > > -- > _______________________________________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > > > > > > > > > > > > > This email and any attachments are intended for the sole use of the named > recipient(s) and contain(s) confidential information that may be > proprietary, privileged or copyrighted under applicable law. If you are not > the intended recipient, do not read, copy, or forward this email message or > any attachments. Delete this email message and any attachments immediately. > >
log.do_compile.30332
Description: Binary data
log.do_configure.29969
Description: Binary data
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
