@Vadla, I would watch this series of videos for an excellent introduction https://m.youtube.com/watch?v=XPnmB-THjiY. It's targeting the zedboard, but you can just replace all board-specific things with your board.
Good luck. On Jun 26, 2017, at 9:02 AM, Jean-Francois Dagenais <[email protected]<mailto:[email protected]>> wrote: On Jun 26, 2017, at 00:01, Vadla Rajesh <[email protected]<mailto:[email protected]>> wrote: Thanks for accepting me as a member in this group You're... welcome? (It's an automated process ;) I want to build yocto morty for xilinx hardware and in meta-xilinx layer,there is no conf file to my hardware and i am using xilinx xc7z020 board . So i want to build yocto to this hardware and build sd card image to boot with yocto Can you please help me how can i add conf file to this hardware and how can i built sd card image for this. This question is not so much meta-xilinx specific, but a generic yocto question. The simplest you can do is read the getting started documentation and google "yocto getting started". http://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html There are plenty of youtubes also that will help you start. Once you have your build dir bootstrapped (a skeleton conf will appear), you'll be able to add the meta-xilinx layer to the build dir's conf/bblayers.conf and override the machine name in conf/local.conf (look for "MACHINE ?=") Good luck! -- _______________________________________________ meta-xilinx mailing list [email protected]<mailto:[email protected]> https://lists.yoctoproject.org/listinfo/meta-xilinx
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
