On 27 August 2017 at 11:02, Manjukumar Matha <[email protected]> wrote: > There are instances when serial console check if required to disable > consoles when it is not defined by SERIAL_CONSOLES.
Is it necessary to set this for all the machines? Since they are all pretty much guaranteed to have the serial devices except in the case of zcu102-zynqmp (which might be a virtual serial with xen/etc). Since this does add a overhead to the boot process since the checking is done with a postinst package step in sysvinit-inittab. Regards, Nathan > > Signed-off-by: Manjukumar Matha <[email protected]> > --- > conf/machine/kc705-microblazeel.conf | 1 + > conf/machine/microzed-zynq7.conf | 1 + > conf/machine/picozed-zynq7.conf | 1 + > conf/machine/qemu-zynq7.conf | 1 + > conf/machine/s3adsp1800-qemu-microblazeeb.conf | 1 + > conf/machine/zc702-zynq7.conf | 1 + > conf/machine/zcu102-zynqmp.conf | 1 + > conf/machine/zedboard-zynq7.conf | 1 + > conf/machine/zybo-linux-bd-zynq7.conf | 1 + > conf/machine/zybo-zynq7.conf | 1 + > 10 files changed, 10 insertions(+) > > diff --git a/conf/machine/kc705-microblazeel.conf > b/conf/machine/kc705-microblazeel.conf > index 39cb3c2..7cfc094 100644 > --- a/conf/machine/kc705-microblazeel.conf > +++ b/conf/machine/kc705-microblazeel.conf > @@ -21,3 +21,4 @@ EXTRA_IMAGEDEPENDS += "virtual/bitstream" > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" > PREFERRED_VERSION_u-boot-xlnx ?= "v2016.07-xilinx-v2016.4%" > > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > diff --git a/conf/machine/microzed-zynq7.conf > b/conf/machine/microzed-zynq7.conf > index aaca1ca..0c68f7d 100644 > --- a/conf/machine/microzed-zynq7.conf > +++ b/conf/machine/microzed-zynq7.conf > @@ -16,6 +16,7 @@ SPL_BINARY = "spl/boot.bin" > EXTRA_IMAGEDEPENDS += "u-boot-zynq-uenv" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" > > diff --git a/conf/machine/picozed-zynq7.conf b/conf/machine/picozed-zynq7.conf > index 9f8a37e..479534b 100644 > --- a/conf/machine/picozed-zynq7.conf > +++ b/conf/machine/picozed-zynq7.conf > @@ -20,6 +20,7 @@ SPL_BINARY = "spl/boot.bin" > EXTRA_IMAGEDEPENDS += "u-boot-zynq-uenv" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" > > diff --git a/conf/machine/qemu-zynq7.conf b/conf/machine/qemu-zynq7.conf > index 0fe99e2..8fc3a2c 100644 > --- a/conf/machine/qemu-zynq7.conf > +++ b/conf/machine/qemu-zynq7.conf > @@ -9,6 +9,7 @@ require conf/machine/include/machine-xilinx-qemu.inc > MACHINE_FEATURES = "ext2 vfat" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" > IMAGE_BOOT_FILES += "${MACHINE}.dtb" > diff --git a/conf/machine/s3adsp1800-qemu-microblazeeb.conf > b/conf/machine/s3adsp1800-qemu-microblazeeb.conf > index 6bd7541..87927f2 100644 > --- a/conf/machine/s3adsp1800-qemu-microblazeeb.conf > +++ b/conf/machine/s3adsp1800-qemu-microblazeeb.conf > @@ -12,6 +12,7 @@ MACHINE_FEATURES = "" > > USE_VT = "" > SERIAL_CONSOLE = "115200 ttyUL0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > MACHINE_ESSENTIAL_EXTRA_RDEPENDS_remove = "device-tree" > > diff --git a/conf/machine/zc702-zynq7.conf b/conf/machine/zc702-zynq7.conf > index ef42301..7d01cae 100644 > --- a/conf/machine/zc702-zynq7.conf > +++ b/conf/machine/zc702-zynq7.conf > @@ -22,6 +22,7 @@ SPL_BINARY = "spl/boot.bin" > EXTRA_IMAGEDEPENDS += "u-boot-zynq-uenv" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > KERNEL_DEVICETREE = "zynq-zc702.dtb" > KERNEL_FEATURES += "features/rtc/rtc.scc" > diff --git a/conf/machine/zcu102-zynqmp.conf b/conf/machine/zcu102-zynqmp.conf > index 5e21e0d..914c89b 100644 > --- a/conf/machine/zcu102-zynqmp.conf > +++ b/conf/machine/zcu102-zynqmp.conf > @@ -13,6 +13,7 @@ MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" > UBOOT_MACHINE = "xilinx_zynqmp_zcu102_revB_defconfig" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-revB.dtb xilinx/zynqmp-zcu102.dtb" > > diff --git a/conf/machine/zedboard-zynq7.conf > b/conf/machine/zedboard-zynq7.conf > index 58cee37..0677d49 100644 > --- a/conf/machine/zedboard-zynq7.conf > +++ b/conf/machine/zedboard-zynq7.conf > @@ -19,6 +19,7 @@ SPL_BINARY = "spl/boot.bin" > EXTRA_IMAGEDEPENDS += "u-boot-zynq-uenv" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > KERNEL_DEVICETREE = "zynq-zed.dtb" > > diff --git a/conf/machine/zybo-linux-bd-zynq7.conf > b/conf/machine/zybo-linux-bd-zynq7.conf > index d44575b..95b85e1 100644 > --- a/conf/machine/zybo-linux-bd-zynq7.conf > +++ b/conf/machine/zybo-linux-bd-zynq7.conf > @@ -14,6 +14,7 @@ PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot" > > MACHINE_FEATURES = "ext2 vfat usbhost usbgadget keyboard screen alsa sdio" > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" > > diff --git a/conf/machine/zybo-zynq7.conf b/conf/machine/zybo-zynq7.conf > index a3e9c06..2bcb4f9 100644 > --- a/conf/machine/zybo-zynq7.conf > +++ b/conf/machine/zybo-zynq7.conf > @@ -20,6 +20,7 @@ SPL_BINARY = "spl/boot.bin" > EXTRA_IMAGEDEPENDS += "u-boot-zynq-uenv" > > SERIAL_CONSOLE = "115200 ttyPS0" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > > KERNEL_DEVICETREE = "zynq-zybo.dtb" > > -- > 2.7.4 > > -- > _______________________________________________ > meta-xilinx mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-xilinx -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
