On 09-10-17 11:23, Luca Ceresoli wrote:
Hi Nathan,
...
What's the current status of U-Boot SPL on zynqmp? Last time I checked
it appeared not yet ready for a complete Linux boot, because it cannot
pass the configuration object to the PMU firmware.
- Can U-Boot SPL boot a complete Linux without FSBL on zcu102?
- How much that applies to other zynqmp chips and boards (especially
UltraZed)?
I worked around it by building the config object into the pmufw:
https://github.com/topic-embedded-products/meta-topic/commit/706f74c9cd5fcf398ff24ee77962ebfe23340998
The data is already there, all that's needed is a line of code that installs it.
This also gets around the licensing issue, the config object is not GPL
compatible, so including it into u-boot code poses a challenge in itself.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
Visit us at the Space Tech Expo Europe (Stand E-71)
--
_______________________________________________
meta-xilinx mailing list
meta-xilinx@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx
