>No need to call it, its already hooked up by default. >http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/net/zynq_gem.c;h=f6bbcdc48eded15e2ed78d842c37b1b6ad46bea9;hb=HEAD#l591 >http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/net/zynq_gem.c;h=f6bbcdc48eded15e2ed78d842c37b1b6ad46bea9;hb=HEAD#l670
>Make sure you have those config options (linked in my previous email) setup >correctly for your target, as well as having the bitstream loaded and it >should setup the mac address when u-boot probes the ethernet device. Ok I understand the flow. Bitstream is loaded before u-boot for sure. Since I'm using the u-boot from meta-xilinx, I should have the config options set correctly right ? The only things I have to do actually is to attach correctly a PS i2c to EMIO, then to pin N18 and N17 on zybo ? I will check this part tonigh ! >>>If you need FSBL then you will need meta-xilinx-tools, or you will need to >>>do it manually. >> Understood. So what FSBL is for ? >FSBL is supported by Xilinx, you can spam their support if you have issues :). Right for sure ;p >Regards, >Nathan Regards, Yohan -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
