On 22 November 2017 at 01:28, Giordon Stark <[email protected]> wrote: > Indeed. I'm now realizing that `make menuconfig` isn't really inheriting > from the xilinx_zynqmp defconfig board at all. So I'm going to copy that > file, and disable all the SPL/SDHCI support there. Thanks! > > [side note: why does bitbake -c menuconfig not work for u-boot-xlnx?]
It is more that u-boot.inc in oe-core doesn't support menuconfig rather that u-boot-xlnx not supporting it. I think this stack overflow answer covers the details and solutions. https://stackoverflow.com/a/43222625 Also keep in mind that u-boot still has not fully switched from header configs to kconfig, so you might still have to config with #defines for certain features. Regards, Nathan > > Giordon > > On Tue, Nov 21, 2017 at 9:25 AM Nathan Rossi <[email protected]> wrote: >> >> On 22 November 2017 at 01:12, Giordon Stark <[email protected]> wrote: >> > Hi, >> > >> > Here's the log file: >> > https://gist.github.com/355ccc2aecb8887a03699d68b5a8c2b5 >> > >> > and here's the defconfig patch that I applied to u-boot-xlnx: >> > https://gist.github.com/07ade34baf39b8717d879760a15a274c (adds a >> > <machine>_defconfig where machine=gfex-prototype3). I'm not sure what >> > went >> > wrong... >> >> Your config is missing 'CONFIG_ZYNQ_SDHCI=y'. But you enable MMC >> options specifically 'CONFIG_SPL_MMC_SUPPORT=y'. >> >> > >> > Right now, my machine configuration is somewhat bare, and I haven't >> > actually >> > enabled SPL yet. That said, it's curious I'm seeing a problem with that >> > when >> >> Your config says otherwise 'CONFIG_SPL=y'. :) >> >> Regards, >> Nathan >> >> > changing out the defconfig? >> > >> > Giordon >> > >> > -- >> > _______________________________________________ >> > meta-xilinx mailing list >> > [email protected] >> > https://lists.yoctoproject.org/listinfo/meta-xilinx >> > -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
