Hey, I just cloned the rocko branch of yocto and the master branch of meta-xilinx and wanted to build a core-image-minimal first.
Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:33 Parsing of 841 .bb files complete (0 cached, 841 parsed). 2154 targets, 226 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.36.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-16.04" TARGET_SYS = "aarch64-poky-linux" MACHINE = "zcu102-zynqmp" DISTRO = "poky" DISTRO_VERSION = "2.4" TUNE_FEATURES = "aarch64" TARGET_FPU = "" meta meta-poky meta-yocto-bsp = "rocko:f7b90ab3eaf832bd81f3efc1dab4dcf6863ac284" meta-xilinx = "master:82ac762e83e37e45db3fbe38ad1e21114a3426b6" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks WARNING: core-image-minimal-1.0-r0 do_rootfs: [log_check] core-image-minimal: found 1 warning message in the logfile: [log_check] warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed, exit status 1 NOTE: Tasks Summary: Attempted 2792 tasks of which 6 didn't need to be rerun and all succeeded. Summary: There was 1 WARNING message shown. After copying the relevant files to my sd, I get following output. U-Boot SPL 2017.01 (Dec 04 2017 - 14:49:28) EL Level: EL3 Trying to boot from MMC1 reading u-boot.bin reading atf-uboot.ub reading atf-uboot.ub NOTICE: ATF running on XCZU9EG/silicon v4/RTL5.1 at 0xfffea000, with PMU firmware NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v1.3(release):f9b244b NOTICE: BL31: Built : 13:59:16, Dec 4 2017 PMUFW: v0.3 zynqmp_clk_get_peripheral_rate mio read fail failed to get rate zynqmp_clk_get_peripheral_rate mio read fail failed to get rate Is there something wrong with my setup? I have no modifications so far. Mit freundlichen Grüßen Kind Regards Franz Forstmayr Research & Development Electronic Circuits and Systems [cid:[email protected]] Rosenberger Hochfrequenztechnik GmbH & Co. KG Hauptstraße 1, 83413 Fridolfing, Germany Phone +49 8684 18-0 Fax [email protected]<mailto:[email protected]> www.rosenberger.com<http://www.rosenberger.com> The information contained in this message is confidential. Data security advice: Please be aware, that data exchange via Internet or E-Mail is not 100% safe. Therefore, please handle sensitive or confidential (bank) data with care. Please take note, that Rosenberger is not asking you for bank data or providing you such data via E-Mail, in principle. In case of deviations or questions please contact us immediately. ** Rosenberger Hochfrequenztechnik GmbH & Co. KG, Registergericht: Amtsgericht Traunstein, HRA 5566 persönlich haftender Gesellschafter: Rosenberger Hochfrequenztechnik GmbH, Registergericht: Amtsgericht Traunstein, HRB 4405 Geschäftsführer: Dipl.-Kfm. Hans Rosenberger, Dipl.-Ing. Bernhard Rosenberger, Dipl.-Ing. Peter Rosenberger, Dr. rer. nat. Tosja Zywietz Disclaimer http://www.rosenberger.com/Disclaimer/disclaimer.html
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
