Hi all, Initially, I tried the bootm command, and found the Image format to be incorrect.. so then I switched to the booti command, and I get this:
> booti 0x200000 0x7000000 0x1000000 Bad Linux ARM64 Image magic! I do something like the following to set things up: > setenv ip no > setenv autoload no > setenv serverip 192.168.1.100 > dhcp > tftpboot 0x200000 Image > tftpboot 0x7000000 zynq-base-gfex-prototype3.tar.gz > tftpboot 0x1000000 gfex-prototype3.dtb Three questions: 1) Is there a different image format I should be using? If so, what is it? 2) are the addresses here arbitrary? 3) if I run without the initrd (passing '-' as the second parameter instead), it gets to a point where it cannot open a root device (we have no working SD card): https://gist.github.com/kratsg/b5630a23aa3b71161da833fcad07eaaf - how to fix this? Having `bootargs=boot=ram0` or something similar did not work. Thanks, Giordon
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
