Hi Arturo > -----Original Message----- > From: [email protected] [mailto:meta-xilinx- > [email protected]] On Behalf Of Arturo Lara Martinez > Sent: Monday, September 10, 2018 3:01 AM > To: [email protected] > Subject: [meta-xilinx] Error on build meta-xilinx > > Hi, > > > > > > My name is Arturo from Spain, and I'm trying to build a Yocto project for > Xilinx. > > > > > I just added meta-xilinx layer, no more layers, and I configure local.conf > setting > MACHINE to "zcu102-zynqmp" and adding the layers to the build as say the build > readme file. > > > > > I don't do any more and I get an error on build: > > > > > ERROR: zynqmp-pmu-binutils-cross-microblazeel-2.31-r0 do_patch: Command Error: > 'quilt --quiltrc /home/arturo/source/poky/build/tmp/work/x86_64-linux/zynqmp- > pmu-binutils-cross-microblazeel/2.31-r0/recipe-sysroot-native/etc/quiltrc > push' > exited with 0 Output: > Applying patch 0003-Disable-the-warning-message-for-eh_frame_hdr.patch > patching file bfd/elf-eh-frame.c > Hunk #1 FAILED at 1042. > 1 out of 1 hunk FAILED -- rejects in file bfd/elf-eh-frame.c Patch > 0003-Disable-the- > warning-message-for-eh_frame_hdr.patch does not apply (enforce with -f) > ERROR: zynqmp-pmu-binutils-cross-microblazeel-2.31-r0 do_patch: Function > failed: > patch_do_patch > ERROR: Logfile of failure stored in: > /home/arturo/source/poky/build/tmp/work/x86_64-linux/zynqmp-pmu-binutils- > cross-microblazeel/2.31-r0/temp/log.do_patch.20101 > ERROR: Task (virtual:zynqmp-pmu:/home/arturo/source/poky/meta/recipes- > devtools/binutils/binutils-cross_2.31.bb:do_patch) failed with exit code '1' > > > I don't know if I miss any step or is something wrong, also try to clone > again repos > form poky and meta-xilinx, but the error still there. > > > > > what I do for prepare to build was: > > 1. > sudo apt-get install gawk wget git-core diffstat unzip texinfo > gcc-multilib \ > build-essential chrpath socat cpio python python3 python3-pip > python3- > pexpect \ > xz-utils debianutils iputils-ping libsdl1.2-dev xterm > 2. > git clone git://git.yoctoproject.org/poky > 3. > source oe-init-build-env > 4. > cd ~/pokygit clone https://git.yoctoproject.org/git/meta-xilinx > 5. > *Add to local.conf MACHINE ?= "zcu102-zynqmp"* > > > 6. > > bitbake-layers add-layer ../meta-xilinx/meta-xilinx-bsp/ > 7. > > bitbake-layers add-layer ../meta-xilinx/meta-xilinx-contrib/ > 8. > > bitbake core-image-minimal >
Use a released branch like rocko or sumo instead of master Thanks, Manju -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
