I looked through this wiki page and followed it exactly. I noticed a different in the expected output vs what I'm getting. Does this indicate anything to you or anyone else?
http://www.wiki.xilinx.com/SD+controller Expect output: sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-arasan ff160000.sdhci: No vmmc regulator found sdhci-arasan ff160000.sdhci: No vqmmc regulator found mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit sdhci-arasan ff170000.sdhci: No vmmc regulator found sdhci-arasan ff170000.sdhci: No vqmmc regulator found mmc1: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit ........ mmc0: new high speed SDHC card at address 1234 mmcblk0: mmc0:1234 SA04G 3.63 GiB mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0: p1 ......... mmc1: new high speed SDHC card at address aaaa mmcblk1: mmc1:aaaa SU08G 7.40 GiB mmcblk1: p1 My output is as follows: [ 2.793138] sdhci: Secure Digital Host Controller Interface driver [ 2.799239] sdhci: Copyright(c) Pierre Ossman [ 2.803650] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.809445] sdhci-arasan ff170000.sdhci: could not find pctldev for node /reset-controller, deferring probe On 9/12/18, 9:23 PM, "Manjukumar Harthikote Matha" <[email protected]> wrote: Hi Jesse, > -----Original Message----- > From: [email protected] [mailto:meta-xilinx- > [email protected]] On Behalf Of Kleve, Jesse R > Sent: Wednesday, September 12, 2018 6:08 PM > To: [email protected] > Subject: [meta-xilinx] Kernel (linux-xlnx) hangs when trying to mount root (SD card & > NFS) > > I’m trying to get my petalinux dom0 kernel to mount my rootfs on top of Xen. I’m > running on the zcu102. The issue I’m having is that the boot hangs at mounting the > rootfs. I’ve tried setting the rootfs to my second partition on my SD card as well as a > NFS mount. > > I think I’ve ruled out it being an issue with my SD card since I’ve been trying NFS too. > Also, I can get the SD card to mount as the rootfs if I run my kernel bare-metal > without Xen. Because of this, I don’t think this post will help me but I could be > wrong. > https://forums.xilinx.com/t5/Embedded-Linux/Xilinx-Linux-does-not-detect-SD- > card-on-boot/m-p/504439#M10196 > Check this link, I think u-boot bootargs needs to be changed for SD boot http://www.wiki.xilinx.com/Booting%20Xen%20on%20ZCU102%20using%20SD%20card Thanks, Manju -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
