Hi,
I'm using the `meta-xilinx` layers to build the OS for the Xilinx ZCU102
board: https://www.xilinx.com/products/boards-and-kits/ek-u1-zcu102-g.html
board.
I compiled for the "zcu102-zynqmp" Yocto machine.
In order for u-boot to build successfully I had to rename the symbolic link
from "${DEPLOYDIR}/pmu-firmware-${MACHINE}.bin" to
"${DEPLOYDIR}/pmu-${MACHINE}.bin" in the "do_install" task of "
pmu-firmware_2017.3.bb recipe".
I used the "rel-v2018.3" branch of meta-xilinx.
I flashed a SD card with the boot files according to:
https://github.com/Xilinx/meta-xilinx/blob/master/meta-xilinx-bsp/README.booting.md#loading-via-sd
but the boot process hangs in SPL with this stack trace:
<debug_uart> Debug uart enabled
"Synchronous Abort" handler, esr 0x96000040
ELR: fffcaa3c
LR: fffc774c
x0 : fdfd00011dfd0060 x1 : 0000000000000000
x2 : 0202ffff0202ffa0 x3 : 0000000020000000
x4 : fdfd00011dfd0068 x5 : 0000000000000000
x6 : 00405fffe0405ff4 x7 : 0000000020000008
x8 : 00000000000000ad x9 : 0000000000000080
x10: 000000000000fffd x11: 0000000000000064
x12: 00000000fffffe6a x13: 0981000800000102
x14: ca99010442042023 x15: 0020890800101045
x16: 0001284017244083 x17: 002011001c040041
x18: 00000000ffff7e90 x19: 0000000020000000
x20: 0000000000000000 x21: fdfd00011dfd0060
x22: 0000000000000000 x23: 0000000000000001
x24: 00000000ffff7f20 x25: 00000000fffdaca8
x26: 00000000fffdb000 x27: 00000000fffd977a
x28: 0000000000000000 x29: 00000000ffff7c10
Resetting CPU ...
### ERROR ### Please RESET the board ###
Also, is it mandatory to compile also "pmu-rom" for this board to boot?
Please advise! Thanks!
--
_______________________________________________
meta-xilinx mailing list
meta-xilinx@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx
