With the 2018.1 version of u-boot, atf and pmu this worked okay. With the "thud" release and 2018.3, loading the FPGA no longer works:
ZynqMP> load mmc $sdbootdev:2 0x100000 /lib/firmware/fpga.bin 19311092 bytes read in 1900 ms (9.7 MiB/s) ZynqMP> fpga load 0 0x100000 $filesize ZynqMP> md 0x100000 00100000: ffffffff ffffffff ffffffff ffffffff ................ 00100010: ffffffff ffffffff ffffffff ffffffff ................ 00100020: ffffffff ffffffff ffffffff ffffffff ................ 00100030: ffffffff ffffffff ffffffff ffffffff ................ 00100040: 000000bb 11220044 ffffffff ffffffff ....D."......... 00100050: aa995566 20000000 20000000 30022001 fU..... ... . .0 00100060: 00000000 30020001 00000000 30008001 .......0.......0 00100070: 00000000 20000000 30008001 00000007 ....... ...0.... 00100080: 20000000 20000000 30002001 00000000 ... ... . .0.... 00100090: 30026001 00000000 30012001 38003fe5 .`.0..... .0.?.8 001000a0: 3001c001 00400000 30018001 04a5a093 [email protected].... 001000b0: 30008001 00000009 20000000 3000c001 ...0....... ...0 001000c0: 00000001 3000a001 00000101 3000c001 .......0.......0 001000d0: 00000000 30030001 00000000 20000000 .......0....... 001000e0: 20000000 20000000 20000000 20000000 ... ... ... ... 001000f0: 20000000 20000000 20000000 30002001 ... ... ... . .0 ZynqMP> No error is displayed, but the FPGA remains unprogrammed (as indicated by the PROG_DONE pin). Reverting to previous sumo version makes it work again. -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
