> you cant use an edm machine as far as i know to cut an iron - at least not > one that big.. you would need to use a diamond wire saw i owuld thin - an > edm is an abaltive proces where a pulse of electricity from a sacrificial > wire literaly blasts away bits of material - while they can make fine > patterns in thin metal that cant cut through signifigant thicknesses
Hi Stan Cutting big surfaces in something like Dronino is a bad idea. But cutting for example clean and compact Munionalusta is just better. My biggest meteorite was 9x9cm full slices from Morasko with weathered weins inside what make cutting longer. One slice was cut in 6 hours. This was pain, but from the other side I get perfect flat slices with minimal cut loses. >From the other hand........... This size of slices I should cut using min. 1mm thin diamond blade. This will take min 6 hours also and produce bad surface where I need to grind another 1mm to make slices flat. So I use only one method for cutting irons - EDM :) -----[ MARCIN CIMALA ]-----[ I.M.C.A.#3667 ]----- http://www.Meteoryt.net [EMAIL PROTECTED] http://www.PolandMET.com [EMAIL PROTECTED] http://www.Gao-Guenie.com GSM +48(607)535 195 --------[ Member of Polish Meteoritical Society ]-------- ______________________________________________ Meteorite-list mailing list [email protected] http://six.pairlist.net/mailman/listinfo/meteorite-list
