Hi David, other interested list members,
The Lone Ranger could have been up there on that mountainside in those woods, I don't know. If he had been, he would have probably had iron on his hip, which sometimes while up in the thick timber by myself, I wished I'd had on me. Pepper spray just doesn't seem to be the right thing to have somehow. A 357 or a 32 Winchester Special would be more comforting, if you know what I mean. And then too, what good is a prospector's pick with a 16" handle. Probably not much. I doubt if a mountain lion would care if his prey was carrying a 16" prospector's pick or, for that matter, if he was swinging a metal detector, eh?

Anyway, by my reference to performing bulk density testing, I meant I was following the steps mentioned in the Field Guide to Meteors and Meteorites by O. Richard Norton and Lawrence A Chitwood. Page 254. Step 1, weigh the specimen. Step 2, zero out the scale with a container of water sitting on it. Step 3, weigh while specimen is suspended in the water. Then divide the specimen weight by the suspended specimen weight to get the g/cc. Once I had done this, I compared the result with the chart in the Guide on page 253 just to be sure I was somewhat correct in my testing. Looked to me that the 7.75g/cc was right in the ballpark for an iron but then I have to say that I don't know fully what man-made iron average bulk density weight is so it could be man-made just the same. From what I can read on the net, man-made iron bulk density average should be comparable to an iron meteorite bulk density average. My scale is a Palmscale 8, not that that matters a whole lot but I believe it is a pretty accurate little bugger.

All the best,
Mike in CO


On Oct 2, 2010, at 4:18 PM, David Gunning wrote:


Hi Mike,

Odd looking specimen you got there.

If it's got a specific gravity of 7.75 it falls within the range of being
a piece of iron (7.3 - 7.8).

I am not sure what you mean when you say "after doing a bulk density
weighing" and coming-up with "7.5g/cc". According to Professor Randy L. Kootev, an internet expert on these kinds of measurements: "In order to measure density, it is necessary to measure the volume of a rock. That's
hard to do accurately".

In any event, from the pictures you posted it reminds me of some sort of
bullet mold.

But what I don't understand is the nickel test reaction.  But, then,
there are many things I don't fully understand.

Maybe King-o-sabi (the Lone Ranger) was casting silver bullets with it.
Some chemical tests for silver can turn strongly red colored, and if
there was a residue of Silver, who knows?

Hi Ho Silver, Up, Up and Awayyyy!

Best regards,

Dave Gunning




______________________________________________
Visit the Archives at http://www.meteoritecentral.com/mailing-list-archives.html
Meteorite-list mailing list
[email protected]
http://six.pairlist.net/mailman/listinfo/meteorite-list

______________________________________________
Visit the Archives at http://www.meteoritecentral.com/mailing-list-archives.html
Meteorite-list mailing list
[email protected]
http://six.pairlist.net/mailman/listinfo/meteorite-list

Reply via email to