My question today ladies and gentlemen is...
How do you change the Font and Font Size when printing a Step Report?
Attached is a sample step report that we use for our milling centers.
What I would like is to have this report done in lets say Courier New font,
regular with a size of 8.
Any suggestions are welcome.
<<REPORT.TXT>>
--------------------------------------------------------------
MILLING Step Report for W:\BO3000\BO3707A.jsf
--------------------------------------------------------------
Job Operations File= W:\BO3000\BO3707A.jsf Date Created= 05/11/00
Revisions= 0 Date Revised=
Created by=
Machine Type= Mill Units= Inch
Part Description= R.H. MOUNTING BLOCK (L.H. CUTTER)
Material Desc= MILD STEEL
Notes= BLOUNT
#S4=E1-110010-004 REV.AB OP.1
R.H. MOUNTING BLOCK (L.H. CUTTER)
MILD STEEL
-CLAMP PART IN VICE STOPPING AGAINST R.H. STOP
-PICKUP BACK R.H. CORNER AND SET X0Y0
-USE 1/8 PACKING SHIMS ON BOTH JAWS
-PICKUP THE BOTTOM OF THE PART AND MOVE UP Z+.005" AND
SET Z0 TO LEAVE .005" MAT'L ON THE BOTTOM OF .503" DIM
-SET Z HEIGHT TO 4.0 INCHES
-PROGRAMS LEAVES .005" MAT'L ON TOP OF THE .503" DIM
T26 =1.0 ROUGH E/M L Speed:90 Feed:2.9
T27 =1.0 FINISH E/M L Speed:90 Feed:2.9
T1 =NO.14 C/DRILL 5/16 X 7/64 H Speed:99 Feed:1.4
T30 =NO.5 DRILL(.205) H Speed:83 Feed:1.6
T31 =1/4-20 UNC TAP L Speed:44 Feed:10.0
T10 =7/32 DRILL(.218) H Speed:77 Feed:1.7
T11 =15/64 DRILL (.234) H Speed:72 Feed:1.6
T12 =9/32 DRILL(.281) H Speed:60 Feed:1.9
T32 =13/32 C/BORE(.406) H Speed:42 Feed:0.9
T33 =NO.20 DRILL(.161) H Speed:99 Feed:1.6
T34 =10-32UNF TAP L Speed:66 Feed:9.3
-- 1 --
