Lets see...
Start with a template file and machine define file that codes close to what
you want. You can get get these files from either the supplied sample files
that come with the software or put in a request to the SmartCAM User Group
for files for your particular machine.
Get the SmartCAM Code Generation Guide from the Acrobat on line manuals out
and start reading. This is probably where the beer(s) would come in handy.
Any questions on terminology just post it here and you'll be sure to get an
answer(s).
Good luck!
-----Original Message-----
From: Jon Baker [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 26, 2000 1:34 PM
To: [EMAIL PROTECTED]
Subject: Re: [mfg-smartcam] code generators
Make sure you stock up on beer before starting.
Jon
----- Original Message -----
From: "Chris Hurst" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, May 26, 2000 9:55 AM
Subject: [mfg-smartcam] code generators
> I am about to tackle my code generators, any help or
suggestions would be
> most
> Appreciated.
>
======================================================================
> To find out more about this mailing list including how to
unsubscribe,
> send the message "info mfg-smartcam" to
[EMAIL PROTECTED]
>
======================================================================
>
======================================================================
To find out more about this mailing list including how to
unsubscribe,
send the message "info mfg-smartcam" to
[EMAIL PROTECTED]
======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
