Re: [mfg-smartcam] Drill Cycle

9 May 2000 00:26:58 -0000

I believe you need this in your tmp. section.
 
#IF(#TLTYPE=4)<#EVAL(#FXD J0.00)>#ELSE<#FXD #MOV>
 
Dave Wolfgang
----- Original Message -----
From: Gary
Sent: Monday, May 08, 2000 5:34 PM
Subject: [mfg-smartcam] Drill Cycle

I have some trouble with my milling post.
Everything is working fine except when we use multiple workplanes and want to tap holes.
Our machine requires a us to cancel the tapping cycle when switching to a new workplane ( H offset ).
Drilling cycles do not require this. I do not want to cancel all cycles when switching to a new workplane in order to keep the file as small as possible.
 To cancel a tapping cycle we need to output  "  G80 J0.00 " before switching to a new workplane.
 
File as posted.
 
: T7
N0730 (MSG, T7 6.000 DIA. TAP M6)
N0740 (MSG, TAPPING)
N0750 M06
N0760 T5
N0770 G71
N0780 H1 G00 X518.0 Y-7.94 Z23.0
N0790 S212 M13
N0800 G60 G84 G95 X518.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0
N0810 H2 G00 X518.0 Y-23.82 Z23.0
N0820 G60 G84 G95 X518.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0
N0830 X368.0 Y-23.82 W23.0
N0840 H1 G00 X368.0 Y-7.94 Z23.0
N0850 G60 G84 G95 X368.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0
N0860 X218.0 Y-7.94 W23.0
N0870 H2 G00 X218.0 Y-23.82 Z23.0
N0880 G60 G84 G95 X218.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0
N0890 X68.0 Y-23.82 W23.0
N0900 H1 G00 X68.0 Y-7.94 Z23.0
N0910 G60 G84 G95 X68.0 Y-7.94 Z-19.0 R0.0 W23.0  F1.0
N0920 G80 J0.000
N0930 G00 Z23.0
 
File as modified.
 
 
: T7
N0730 (MSG, T7 6.000 DIA. TAP M6)
N0740 (MSG, TAPPING)
N0750 M06
N0760 T5
N0770 G71
N0780 H1 G00 X518.0 Y-7.94 Z23.0
N0790 S212 M13
N0800 G60 G84 G95 X518.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0
N0805 G80 J0.000
N0810 H2 G00 X518.0 Y-23.82 Z23.0
N0820 G60 G84 G95 X518.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0
N0830 X368.0 Y-23.82 W23.0
N0835 G80 J0.000
N0840 H1 G00 X368.0 Y-7.94 Z23.0
N0850 G60 G84 G95 X368.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0
N0860 X218.0 Y-7.94 W23.0
N0865 G80 J0.000
N0870 H2 G00 X218.0 Y-23.82 Z23.0
N0880 G60 G84 G95 X218.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0
N0890 X68.0 Y-23.82 W23.0
N0895 G80 J0.000
N0900 H1 G00 X68.0 Y-7.94 Z23.0
N0910 G60 G84 G95 X68.0 Y-7.94 Z-19.0 R0.0 W23.0  F1.0
N0920 G80 J0.000
N0930 G00 Z23.0
 
Any help is appreciated.
 
Regards,
Gary Marxrieser

Reply via email to