Its me again! Hold the presses on this one! I solved the problem by simply
shutting down and rebooting the computer and no more errors. I then called
our MIS department and they informed me that they had indeed experienced
some network problems. Hmmm...
-----Original Message-----
From: Michael Senack [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 10:38 AM
To: '[EMAIL PROTECTED]'
Subject: [mfg-smartcam] mcl help
Below is what I thought was a simple macro to do a dump
graph...
// Production_Milling 11.5 Windows 10/16/98 16:52:40 Macro
File
// w:\mcl\MPRINT.mcl
// CREATED: 06/09/00
//
// This macro does a File, Print and Graphic for the MILLING
machines
// It cannot print Landscape.
//
NEW_GRP[]
//
MASK[TL="*", SH=0]// turn off all tools
//
VIEW_ANGLE[A1=0, A2=0, VA=2, VP=0, RS=1, WP=0]// f9
//
DUMP_GR[LM=.5, TM=.5, RM=.5, BM=.5]
The first time I run this macro it works fine. However, the
second time
through it causes "2938: Macro execution stopped by
application error" at
which point I hit enter and then it says "Printer Error
2713: Current view
will not fit with the specified margins/scale. Reduce the
margins or scale."
Now the real kicker here is that I went through the above
steps in the macro
file and read in and printed off 5 dump graphs and no
problem!
Any help is greatly appreciated.
======================================================================
To find out more about this mailing list including how to
unsubscribe,
send the message "info mfg-smartcam" to
[EMAIL PROTECTED]
======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
