William, While the gear macro was originally written for the DOS version of Advanced Wire EDM, the control panel was from v11.5. The size of the control panels in versions 6 through 10 were fixed at 6 rows by 64 columns while the panel size in v11 is adjustable between 2 to 5 rows by 80 columns. The panels I sent you were for v11 and set to be 3 rows high by 80 columns wide. This is probably the source of your problem. Try using the attached panel created for pre v11 SmartCAM.
============================================= Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] http://www.highsteel.com ============================================= -----Original Message----- From: William Ray [mailto:[EMAIL PROTECTED]] Sent: Sunday, October 01, 2000 1:05 PM To: [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] SmartCAM (gear drawing) Frederick Will this work with Advanced 3D Ver. 10.0 I tried it and I get an illegal error when opening the app. Thanks William ----- Original Message ----- From: "Lauzus, Frederick" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, September 14, 2000 8:15 AM Subject: RE: [mfg-smartcam] SmartCAM (gear drawing) Attached are the files to support the gear creation macro included with SmartCAM Advanced Wire EDM. This macro can be transplanted to the milling, fabrication and turning products. 1. Unzip the attached file. 2. Copy the file "Gear.mcl" into the SmartCAM "Shared\Sysmcl\" folder. 3. Copy the file "Awuser.pcb" into the SmartCAM "Shared\" folder. 4 .Open your application ini file for your particular application (i.e. pmill.ini, amill.ini, ffm.ini, etc...). 5. In the application ini file, find the section labeled "[PcbPaths]" 6. In the PcbPaths section, find the label "usrelmt" 7. Edit the file name and path for usrelmt for "AWUSER.PCB". (i.e. usrelmt=C:\SM9\SHARED\AWUSER.PCB) If SmartCAM is running, you will need to close and restart the application before the change is active. The Gear function can be accessed through the "Create--User Elmts--Gear" menu selections. I've included the documentation for the gear macro from the Advanced Wire EDM help in both Word 6 and plain text formats. ============================================= Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] http://www.highsteel.com ============================================= -----Original Message----- From: Alan Gordon [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 14, 2000 2:47 AM To: [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] SmartCAM (gear drawing) So would I! I have used TwinCAD; website http://www.twincad.com. It has a macro "invgear" which you type into the command line. You are then prompted for the details and it then draws the gear. It can then be transferred to SmartCAM. > Has anyone out there created a macro to draw up sprockets, Cams and gears > in smartcam by just providing the basic data on the part? We would be very > interested in acquiring it if you have it. > > Darren V. Keegan > Plant Manager > > R�chling Machined Plastics > RD 6 Box 528, Greensburg, PA 15601 > (724)834-1340 x 24, Fax (724)834-7962 > http://www.roechling.com > > Lignostone Polystone Durostone Perma-Bolt > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== Regards Alan Gordon Christchurch New Zealand ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ====================================================================== ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
awuser_v10.pcb
Description: Binary data
