I think its referred to as macro "A", you can re-write and convert macro "b" to "a" but its not a piece of cake.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 18, 2000 8:10 AM To: Marc A. Frazer, Sr. Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] Cutter diameter for Fanuc OM Series control Importance: High FYI for all of you Fanuc Macro programmers out there: The Fanuc OM controls do NOT use Macro B. They have a different (not as robust) macro version. Having said this, I don't recall what exactly it IS called, but I know macros written in Macro B will not work on an OM control. It's quite possible that the G10 command will work for updating an offset from within a program. The fanuc operators manual for the OM control will list all of the various macro codes and their functions. Chris ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
