If I'm thinking what you're asking then maybe this might help...
Template File:
@START
#EVAL(#U8=0)<FOR DEBUG HEADINGS SET U8 TO 1,SET TO 0 FOR NO DEBUG>
#IF(#U8=1)<**** START>
<#EVAL(#U2=0)>
% #FILE <#S4>
% #DATE - #SYSTIME
%
% CHANGE V6 ON LINE N105 TO ACCOMODATE
% DIFFERENCE BETWEEN PRINT THICKNESS AND PART THICKNESS
%
#ONBLKG1G90G97F
V6D0
<#S1>
<#S2>
<#S3>
M0 T#TOOL #TLCMT
T#TOOL
G39D0.0
#IF(#TLDIA=0)<G1F#FEED>#ELSE<G1M3S#SPEEDF#FEED>
<#EVAL(#U9=0)>
<#EVAL(#V6=0)>
<#EVAL(#U7=1)>
#EVAL(#RFEED=R)
<#EVAL(#LOFF=(#SPEED+9)/10)>
<#EVAL(#LOFF=ABS(#LOFF))>
<#EVAL(#LOFF=INT(#LOFF))>
#IF(#LOFF<5)<#EVAL(#LOFF=5)>
#IF(#TLDIA=0)<>#ELSE<G4X#LOFF.>
G48R
#RESET(#MOV)
#EVAL(#V4=.03)
#EVAL(#C0=1)
@TOOLCHG
#IF(#U8=1)<**** TOOLCHG>
#RESET(#MOV,#XPOS,#YPOS,#FXD)
G1Z#ZHOMERM5M9
#IF(#U9=1)<G97F>
<#EVAL(#V9=0)>
<#EVAL(#V0=2)>
<#EVAL(#V7=0)>
<#EVAL(#V6=0)>
<#EVAL(#C1=0)>
<#EVAL(#PECK=0)>
G49R
G39D0.
<#S1>
<#S2>
<#S3>
M0 T#TOOL #TLCMT
T#TOOL
#IF(#U9=1)<G97F>
#IF(#TLOP=2,AND#U9=1)<#EVAL(#FEED=#FEED*.5)>
#IF(#TLOP=2,AND#U9=1)<G96F#FEEDD#FEED>
#IF(#TLOP=2,AND#U9=1)<#EVAL(#FEED=#FEED*2)>
#IF(#TLOP=2,AND#U9=1)<G96F#FEEDD#FEED>
G39D0.0
G1#IF(#TLDIA=0)<F#FEED>#ELSE<M3S#SPEEDF#FEED>
<#EVAL(#LOFF=(#SPEED+9)/10)>
<#EVAL(#LOFF=ABS(#LOFF))>
<#EVAL(#LOFF=INT(#LOFF))>
#IF(#LOFF<5)<#EVAL(#LOFF=5)>
#IF(#TLDIA=0)<>#ELSE<G4X#LOFF.>
G48R
#IF(#TLDIA=0)<>#ELSE<#EVAL(#C0=1)>
#RESET(#MOV)
#EVAL(#V4=.03)
#IF(#TLDIA<.065)<#EVAL(#V4=.05)>
#EVAL(#U7=1)
#EVAL(#C0=1)
#EVAL(#ZCHK=#ZHOME)
#EVAL(#ZPOS=#ZHOME)
#UPDATE(#XPOS,#YPOS,#ZPOS,#ZCHK)
#RESET(#XPOS,#YPOS,#ZCHK,#ZPOS,#C0)
@END
#IF(#U8=1)<**** END>
G1Z#ZHOMERM5M9
G49R
X0.Y0.R
G39D0.
M30
#OFFBLK
%
Mcl File:
// Production_Milling 11.5 Windows 10/16/98 16:52:40 Macro File
// w:\mcl\1.mcl
// CREATED: 06/29/00
//
// turns debug headings on for T5 & T1
ELMT_SEQ[BA=1, EL="1", ME=1]
UEVENT[XS=ENX(1), YS=ENY(1), LV=2, TX="#EVAL(#U8=1)"]
//
// turns debug headings for all remaining tools
ELMT_SEQ[BA=1, EL="28", ME=1]
UEVENT[XS=ENX(28), YS=ENY(28), LV=0, TX="#EVAL(#U8=0)"]
Coded File:
% 1 CD245265-022 REV.AC OP.1
% 06/29/00 - 11:14AM
%
% CHANGE V6 ON LINE N105 TO ACCOMODATE
% DIFFERENCE BETWEEN PRINT THICKNESS AND PART THICKNESS
%
N100G1G90G97F
N105V6D0
N110M0 T5 5/8 X 90 SPOT DRILL L
N115T5
N120G39D0.0
N125G1M3S54F1.2
N130G4X6.
N135G48R
N140 G1Z2.0R
N145X-0.25Y-0.75R
N150**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N155V60D0.1005
N160V64D.1
N165V66D0.03
N170V67D12
N175X-0.25Y-0.75R
N180Z0.1R
N185M8
N190M2008
N195**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N200V60D0.2109
N205X-1.0Y-0.75R
N210M2008
N215**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N220X-2.25Y-3.0R
N225M2008
N230**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N235V60D0.25
N240X-3.75Y-0.75R
N245M2008
N250**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N255V60D0.2109
N260X-6.0Y-0.75R
N265M2008
N270**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N275V60D0.25
N280X-9.25Y-0.75R
N285M2008
N290**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N295V60D0.1005
N300X-9.75Y-0.75R
N305M2008
N310**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N315V60D0.2109
N320X-10.5Y-0.75R
N325M2008
N330**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N335X-11.5Y-5.25R
N340M2008
N345**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N350V60D0.1005
N355X-9.75Y-5.25R
N360M2008
N365**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N370V60D0.25
N375X-9.25Y-5.25R
N380M2008
N385**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N390V60D0.2109
N395X-6.0Y-5.25R
N400M2008
N465**** TOOLCHG
N470 G1Z2.0RM5M9
N475G49R
N480G39D0.
N485M0 T1 1/8 CENTER DRILL H
N490T1
N495G39D0.0
N500G1M3S68F1.0
N505G4X7.
N510G48R
N515**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N520V60D0.15
N525V64D.1
N530V66D0.03
N535V67D10
N540X-3.2585Y-3.0R
N545Z0.1R
N550M8
N555M2008
N560**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N565X-11.133Y-2.405R
N570M2008
N575**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N580X-4.631Y-2.83R
N585M2008
N695**** FXD2=Type Spot Drill=M2008 Bostomatic Drill Cycle with Dwell
N700X-11.133R
N705M2008
N710 G1Z2.0RM5M9
N715G49R
N720G39D0.
N725M0 T14 11/32 DRILL(.344) L
N730T14
N735G39D0.0
N740G1M3S98F1.3
N745G4X10.
N750G48R
N755V60DV6+1.7033
N760V63D0.25
N765V64D.1
N770V66D0.04
N775V67D13
N780X-3.2585Y-3.0R
N785Z0.1R
N790M8
N795M2000
N800X-11.133Y-2.405R
N805M2000
N810 G1Z2.0RM5M9
N815G49R
N820G39D0.
N825M0 T15 23/64 DRILL(.359) L
N830T15
N835G39D0.0
N840G1M3S94F1.3
N845G4X10.
N850G48R
N855V60D1.708
N860V64D.1
N865V66D0.04
N870V67D13
N875X-3.2585Y-3.0R
N880Z0.1R
N885M8
N890M2007
N895X-11.133Y-2.405R
N900M2007
N905 G1Z2.0RM5M9
N910G49R
N915G39D0.
N920M0 T16 15/32 DRILL(.469) L
N925T16
N930G39D0.0
N935G1M3S72F1.5
N940G4X8.
N945G48R
N950V60DV6+1.7408
N955V63D0.25
N960V64D.1
N965V66D0.04
N970V67D15
N975X-3.75Y-0.75R
N980Z0.1R
N985M8
N990M2000
N995X-9.25R
In the .pm4 file I'm using user_cmd to eval #U8 to turn on and off debug
headings via a .mcl file.
-----Original Message-----
From: Joe Geraci [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 11:08 AM
To: 'Michael Senack'; 'Smartcam' (E-mail)
Subject: RE: [mfg-smartcam] tmp variable initialized
from a macro
Sorry,
User defined template variable, although in this case I
would be using
#U0-#U19
-----Original Message-----
From: Michael Senack [mailto:[EMAIL PROTECTED]]
<mailto:[mailto:[EMAIL PROTECTED]]>
Sent: Thursday, June 29, 2000 11:04 AM
To: 'Joe Geraci'; 'Smartcam' (E-mail)
Subject: RE: [mfg-smartcam] tmp variable initialized
from a macro
Exactly what is a " udtv variable"?
-----Original Message-----
From: Joe Geraci
[mailto:[EMAIL PROTECTED]] <mailto:[mailto:[EMAIL PROTECTED]]>
Sent: Thursday, June 29, 2000 10:37 AM
To: 'Smartcam' (E-mail)
Subject: [mfg-smartcam] tmp variable
initialized
from
a macro
Hi Everyone,
Can anyone show me a example of how to set a udtv
variable
from a macro,
I'm looking to test (In the tmp file) for a given
situation
(macro
created usr_cmd) in the shape file.
Thanks,
J.G.
======================================================================
To find out more about this mailing list including how
to
unsubscribe,
send the message "info mfg-smartcam" to
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
