Gregg Olson finally got out of a bunch of meetings and wrote: > Steve, > > This does sound like a precision problem. Smartcam doesn't truncate, but > it certainly can be rounding to 3 places. If you need 4 place output (and > you should check your control manual to confirm) you will have to adjust > the precision of the output in the .smf file. I don't have a manual handy > but you'll have to adjust your output format for your positioning words to > something like D3.4, you'll probably see it currently set to D4.3.
SMF Question 22 > Also if > you do that you should adjust the smallest machine increment question to > .0001 from .001. SMF Question 21 > Perhaps John Gent can dig up the question #'s for you. > > --gregg > > Steve Buck wrote: > > > I wrote a message yesterday about a post problem which I will repost > > below. I will add that I am using Production Milling 11.5 with all > > geometry on the Z "0.0" level. The laser hangs on arcs ONLY and hanging > > error states target arc not found. It doesn't > > hang very often. > > > > I have a mazak laser that is hanging on me sometimes and I think it > > might be beacuse my post is truncating instead of rounding. > > Here it is....also it is a 4 place decimal readout control. HELP!!! > > -- John Gent Structural Dynamics Research Corporation CAM-QA Eugene, Oregon My hairline isn't receding, it's done. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
