Correct me if I'm wrong, but isn't the format in the first example the correct one?
> -----Original Message----- > From: Jeff Pieper [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, February 15, 2001 10:41 PM > To: SmartCAM List Server > Subject: [mfg-smartcam] Block Delete > > Hey Group, > When I code a job on SmartCAM with Block Delete's in the program > it out puts like this. > > N35 M106 (1" X 90' SPOT DRILL TOOL 1) > N40 T02M08 > N45 G00X-3.006Y1.78S2500M03 > N50 G43Z0.0H01 > N55 G98G81Z-1.24R-0.9F35.0 > /N60 X-2.294Y2.47 > /N65 X-0.9Y1.95 > /N70 X-1.5Y2.0 > > How can I get the Block Delete's to code like this? > > N35 M106 (1" X 90' SPOT DRILL TOOL 1) > N40 T02M08 > N45 G00X-3.006Y1.78S2500M03 > N50 G43Z0.0H01 > N55 G98G81Z-1.24R-0.9F35.0 > N60 / X-2.294Y2.47 > N65 / X-0.9Y1.95 > N70 / X-1.5Y2.0 ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
