[mfg-smartcam] Starting over with N10

[Jeff Pieper]

Well, I got this one figured out on my own by adding #EVAL(#BLK=10), I still need help getting the block skip to output after the N number. Any suggestions?     N35 M106 (1" X 90' SPOT DRILL TOOL 1) N40 T02M08 N45 G00X-3.006Y1.78S2500M03 N50 G43Z0.0H01 N55 G98G81Z-1.24R-0.9F35.0 /N60 X-2.294Y2.47 /N65 X-0.9Y1.95 /N70 X-1.5Y2.0   How can I get the Block Delete's to code like this?   N35 M106 (1" X 90' SPOT DRILL TOOL 1) N40 T02M08 N45 G00X-3.006Y1.78S2500M03 N50 G43Z0.0H01 N55 G98G81Z-1.24R-0.9F35.0 N60 / X-2.294Y2.47 N65 / X-0.9Y1.95 N70 / X-1.5Y2.0