Index your plane to the rotation angle you need. For an offset for each index Duplicate your tool in your Job Planner and change your offset for the index.
Tool #1 0 deg. G54 H1 Tool #1 90 deg. G55 H50 Tool #1 270 deg. G56 H51 and so on. Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: "Kevin M. Clark" <[EMAIL PROTECTED]> To: "SmartCam Fourm" <[EMAIL PROTECTED]> Sent: Tuesday, July 03, 2001 12:04 PM Subject: [mfg-smartcam] Anyone know how to? > How do I get my template file to add a rotation (90 degrees) and add > an offset to each rotation. I need a total of 16 rotations with 16 > separate offsets. Four rotations for each process. I have a way to > do it if the rotations aren't all the same, but we are going from a > 3 sided fixture to a 4 sided fixture. > -- > Kevin M. Clark > Programmer > Abbott Workholding Inc. > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
