Sorry, It's Monday.................
.(See attached file: 16i.zip)
06/25/2001 10:03 AM
David Vandervort
David Vandervort
David Vandervort
06/25/2001 10:03 AM
06/25/2001 10:03 AM
To: [EMAIL PROTECTED], "'SmartCam Forum'" <[EMAIL PROTECTED]>
cc: [EMAIL PROTECTED]
Subject: Re: [mfg-smartcam] Code Generator for Fanuc 16i-M (Document link:
David Vandervort)
Paul,
This is a work in progress and should be used for reference only. I'm using it
on a VMC with a 4th axis (C axis called B) to code holes on the XY plane but
output C axis moves. Hope this helps.
Fred,
Would you look at this and tell me why I always get an invalid numeric
expression error from my @FIRSTHOLE section? It functions correctly, but always
errors when there is a hole present in the process model.
Thanks,
Dave
"Paul G Anderson" <[EMAIL PROTECTED]> on 06/21/2001 07:11:27 PM
Please respond to [EMAIL PROTECTED]
To: "Mfg-Smartcam \(E-mail\)" <[EMAIL PROTECTED]>
cc: "Dave Gallagher"@loki.sdrc.com (bcc: David Vandervort/USA/PSTI/Praxair)
Subject: [mfg-smartcam] Code Generator for Fanuc 16i-M
Hello All, Does any have a code generator for a Fanuc 16i-M controller ? Its
on a brand new Daewoo 4 axis horizontal twin pallet machining center.
Anything close would help as well. Thanks in advance !
Paul G Anderson
ME/Programming
Tura Machine Co
610-534-1800 Ext. 218
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
16i.zip
Description: .ZIP File
