Hello,
Here is some sample code and I will try to hylight the problems that my post is producing and mabee someone can help! N25000 N5 G18 T6 S2292 M6 N10 G54 N15 G0 X1.29 Z3.1758 Y0.1 N20 X1.29 Z3.1758 Y0.1 M3 N25 Y0.05 N30 G1 Y-0.25 F2.0 N35 G3 X1.546 Z3.4842 I2.6007 K2.3484 F4.0 N40 X1.7891 Z3.71 N45 G1 X1.29 N50 Z3.1758 N55 G0 Y0.1 N60 Z1.29 N65 Y0.05 N70 G1 Y-0.25 F2.0 N75 X1.4683 F4.0 N80 G3 X1.29 Z1.521 I2.6007 K2.3484 N85 G1 Z1.29 N90 X1.04 Z1.04 First off my machine is a universal maho that is programed in horizontal but we use vertical att. So the Y's and Z's are reversed. First problem is on line 40 it is dong a linear movement however, the G1 doesn't come in till the 2nd line? THe next is it does one portion at the .25 depth, then comes up for no reason reposisions itself and goes down again and finnishes? Well my day just got worse, I was runing through the program on my machine and then pooff the hydrolics are gone. All I got threw was these first few lines. There are somethings that are wrong or things that I would like help to change. As soon as my machine is back on line I will send the rest. Thanks Kevin Brown Brock University St. Catherines ont. _______________________________________________________ Send a cool gift with your E-Card http://www.bluemountain.com/giftcenter/ ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
