We have allot of machines with pallet changers and we use the same G54-G59 offsets on both pallets. Unless you need more than 6 fixture offsets on one pallet, then you need to get the extended offsets for your control.
Colin Williams -----Original Message----- From: Dave Wolfgang [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 02, 2001 9:47 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] Programming Dual Pallet Machines Depending on the control type that comes with the machine you might already have more work shifts than the standard G54-G59. And if not you might want to reconsider upgrading your package. There is always a way of working around that dilemma if you would rather not upgrade, but it would sure would make things easier in the long run. Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 02, 2001 7:26 AM Subject: [mfg-smartcam] Programming Dual Pallet Machines > > All, > > We are considering the purchase of a dual pallet change machine. I > know there are lots of things to do differently with regards to programming. > I am looking for information on how to get multiple work coordinates to be > processed in the code file. (G54, G55, ect.) Are there any areas of the SC > books that relate to pallet changers? > > Thanks for the Info: > > > > James M. Johns Phone: 717.653.1811 > New Standard Corporation Ext: 350 > 125 Pinkerton Road Fax: 717.653.4678 > Mount Joy, PA 17552 Email: [EMAIL PROTECTED] > > Jim Johns WABTEC CORPORATION CONFIDENTIALITY NOTE The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
