Here's what I have so far. I can't seem to get the #TPINDX to go
clear to the next tool change.
T1003 is my first tool. I cut out the fixture offset lines and
header. The D1 is OK.
N120 G00 T1003 M6
N130 (MSG,T#1003 1.000 SPOT DRILL 132 DEG.)
N140 G00 B90.0 H0
N150 G00 X0.75 Y1.0 Z1.0 H1 S600 T1106 D1 M13
N160 G82 Z-0.2182 R0.1 F2.4
N170 Y1.985
***** @TPINDX *****
N240 G80
N250 G00 Z1.0000
N260 M09 M26
N270 X15.0 Y15.0 Z24.0 D0 H0
N280 M01
N290 B180.0
N300 G00 X0.75 Y1.0 Z1.0 H2 S600 D1 M13
N310 G82 Z-0.2182 R0.1 F2.4
N320 Y1.985
***** @TPINDX *****
N390 G80
N400 G00 Z1.0000
N410 M09 M26
N420 X15.0 Y15.0 Z24.0 D0 H0
N430 M01
N440 B270.0
N450 G00 X0.75 Y1.0 Z1.0 H3 S600 D1 M13
N460 G82 Z-0.2182 R0.1 F2.4
N470 Y1.985
***** @TPINDX *****
N540 G80
N550 G00 Z1.0000
N560 M09 M26
N570 X15.0 Y15.0 Z24.0 D0 H0
N580 M01
N590 B0.0
N600 G00 X0.75 Y1.0 Z1.0 H4 S600 D1 M13
N610 G82 Z-0.2182 R0.1 F2.4
N620 Y1.985
***** @TPINDX *****
N690 G80
N700 G00 Z1.0000
N710 M09 M26
N720 X15.0 Y15.0 Z24.0 D0 H0
N730 M01
N740 G00 X-0.75 Y1.0 Z1.0 H9 S600 D1 M13
N750 G82 Z-0.2783 R0.1 F2.4
N760 Y1.985
***** @TOOLCHG ***** <---- should be ***** @TPINDX *****
N830 G80
N840 G00 Z1.0000
N850 M09 M26
N860 X-15.0 Y15.0 Z24.0 D0 H0
N870 M01
N880 B180.0
N890 G00 X-0.75 Y1.0 Z1.0 H10 S1079 D1 M13 <----Notice the speed
change! should be S600
N900 G82 Z-0.2783 R0.1 F2.4
N910 Y1.985
***** @TOOLCHG ***** <---- should be ***** @TPINDX *****
N980 G80
N990 G00 Z1.0000
N1000 M09 M26
N1010 X-15.0 Y15.0 Z24.0 D0 H0
N1020 M01
N1030 B270.0
N1040 G00 X-0.75 Y1.0 Z1.0 H11 S1079 D1 M13 <----Notice the speed
change! should be S600
N1050 G82 Z-0.2783 R0.1 F2.4
N1060 Y1.985
***** @TOOLCHG ***** <---- should be ***** @TPINDX *****
N1130 G80
N1140 G00 Z1.0000
N1150 M09 M26
N1160 X-15.0 Y15.0 Z24.0 D0 H0
N1170 M01
N1180 B0.0
N1190 G00 X-0.75 Y1.0 Z1.0 H12 S1079 D1 M13 <----Notice the speed
change! should be S600
N1200 G82 Z-0.2783 R0.1 F2.4
N1210 Y1.985
***** @TOOLCHG *****
N1280 G80
N1290 G00 Z1.0000
N1310 M09 M26
N1320 X-15.0 Y15.0 Z24.0 D0 H0
N1340 (MSG, TOOL TIME: 8.41)
:
N1350 G00 T1106 M06
N1360 (MSG,T#1106 0.531 SPADE DRILL 17/32)
N1370 G00 X0.75 Y1.0 Z1.0 H1 S1079 D1 T1305 M20
***** @TPINDX *****
Any help is appreciated.
Thanks
--
Kevin M. Clark
Programmer
Abbott Workholding Inc.
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
