Kevin,
Edit your FXD4 section at the feed to look like this
F#FMT(#FTHRD,D1.6)
Dave Wolfgang
CNC Programmer/Supervisor
www.hrindustries.net
----- Original Message -----
From: "Kevin Brown" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 15, 2001 2:38 PM
> Hello,
>
>
> When I tap on the lathe smartcam rounds off to 3 dcimal places and that
> has caused me problems, how do I change that so it is good to say 6
> decimals? Thanks!
>
>
>
> Kevin Brown
> Technical Services
> Brock University
> St. Catharines, ONT
>
>
>
>
>
> _______________________________________________________
> Send a cool gift with your E-Card
> http://www.bluemountain.com/giftcenter/
>
>
> ======================================================================
> To find out more about this mailing list including how to unsubscribe,
> send the message "info mfg-smartcam" to [EMAIL PROTECTED]
> ======================================================================
>
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
