Dean, When SmartCAM encounters a Point in the database, it jumps to the @RAP section of your template file. You need to make sure the section is available. Also it is very important that the Point element is a tool (Step) as opposed to a layer. Hope this helps...
John W. Kanney Automated Solutions, Inc. (540) 949-7703 ----- Original Message ----- From: "Dean A. Scott" <[EMAIL PROTECTED]> To: "Smartcam User Group (E-mail)" <[EMAIL PROTECTED]> Sent: Monday, January 07, 2002 7:44 AM Subject: [mfg-smartcam] RAPID POINTS > Hi everyone, > Using adv. milling, instead of setting my clearance height so my > tool will clear the clamps, I put in rapid points to clear them. the > problem is that my code generator is not recognizing these points. Could > someone show me what to add to my post so it will output these rapid points > in my code. Thanks. > > Dean > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
