Does anyone know how to set up the smf so that whatever I enter into the tool set-up is what is actually produced in the code that is generated. An example of what I am talking about is whenever I add a peck drill cycle and I tell it to peck .1 at a time, if the smf file is set to .050 then it is going to peck at .050. If I want an end mill to plunge at the same rate as the feedrate it will only plunge at 50% of the feedrate because that is what the smf is set at. Even if I actually type a different plunge rate in.
Any help would be appreciated.
John Acosta
CAM Programmer/Machinist
www.mi-manufacturing.com
MSN Photos is the easiest way to share and print your photos: Click Here
====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
