John, We have a little Turn-Mill and use PartMaker by IMCS to program it. Works well for us. Can also be used for lathes, mills and swiss style machines. http://www.partmaker.com/
Hope this helps, Mike Deren -----Original Message----- From: John Collins [mailto:[EMAIL PROTECTED]] Sent: Wednesday, May 08, 2002 9:17 AM To: [EMAIL PROTECTED] Subject: [mfg-smartcam] mt-253 I would like to know if anyone has worked wiyh this machine. and what I need to program it. this is a turning milling center. is ffm the right program or is there something better I need. any help would be appreciated. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ====================================================================== ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
