RE: [mfg-smartcam] error code 2561 ALL BETTER NOW

[Doug Boyd]

Title: error code 2561

Jitendra's fix worked. I had tried various methods to get these files associated, but something was not working. The instructions below got it working. Thanks!!   Doug -----Original Message----- From: Jitendra Patel [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 05, 2002 11:19 AM To: Doug Boyd; Smartcam User Group (E-mail) Subject: Re: [mfg-smartcam] error code 2561 Douglass,   This was discuss before in this group - posting last messages.   -J. Patel ----- Original Message ----- From: Doug Boyd To: Smartcam User Group (E-mail) Sent: Thursday, September 05, 2002 1:05 PM Subject: [mfg-smartcam] error code 2561 I recently had my hard drive go belly up, and got a new one in with SC and everything ghosted in. I can launch and run my Pmill from the shortcut, or drag .Pm4 files to the shortcut, but when I double-click on the .Pm4 file in explorer, Pmill launches part way and then gives me an error code #2561 (C:\SM11\CMI\"C:\SM11\CMI\1099.pm4) 2561: This file was not found. What puzzles me is that I re-associated the files to Pmill.exe, but it won't launch all the way. I suspect it is some sort of errant path defination, but I cannot find any hints in the Pmill.ini or the smartcam.ini file. Any ideas? Douglass Boyd   If you do not have PM4 extension listed, do following - windows explorer --> tools --> folder option --> file type --> New -->type PM4 -->ok Now highlight PM4 extension --> Advanced --> type 'SmartCam file' then click change icon --> Browse --> go to smartcam system folder and point to ffm.exe ( or other application) --open -> ok --> You will back to Edit file type window. click   New --> Action -> type  open In Application used to perform action: type C:\SM9\SYSTEM\ffm.exe %1 ->ok -> close And double click will work. - J. Patel ----- Original Message ----- From: "Alpha Tool" <[EMAIL PROTECTED]> To: "Jitendra Patel" <[EMAIL PROTECTED]> Sent: Thursday, August 09, 2001 9:10 AM Subject: Re: [mfg-smartcam] Smartcam & Windows 2000 > What if the pm4 extension is not there,( in the file type area) > > Ed > ----- Original Message ----- > From: "Jitendra Patel" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, August 09, 2001 7:26 AM > Subject: Re: [mfg-smartcam] Smartcam & Windows 2000 > > > > You can open PM4 files by double clicking in win2k explorer. > > Edit your "open" action command and remove quotation marks from command > > line. > > > > Do following - > > windows explorer --> tools --> folder option --> file type --> > > highlight PM4 extension -->advanced --> edit --> Remove quotation mark > > from  'Application used to perform action' > > > > like --> C:\SM9\SYSTEM\ffm.exe %1 > > > > and you will able to open pm4 files by double clicking. > > > > - J. Patel > > > > ----- Original Message ----- > > From: "Pete Ruehle" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > > Sent: Wednesday, August 08, 2001 9:04 AM > > Subject: RE: [mfg-smartcam] Smartcam & Windows 2000 > > > > > > > Yes, smartcam runs fine, maybe better than in NT. > > > > > > The only problem that I have is that you can no longer double-click on a > > > model file (eg *.pm4) in windows explorer to open smartcam and the file. > > > The association is there, it just won't happen.  Same is true for > windows > > > search results.  I now drag and drop the file on to the smartcam desktop > > > shortcut. > > > > > > Regards, > > > Pete > > > > > > > > > > > > -----Original Message----- > > > From: Steve Rushton [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, August 08, 2001 8:31 AM > > > To: [EMAIL PROTECTED] > > > Subject: [mfg-smartcam] Smartcam & Windows 2000 > > > > > > > > > We are upgrading our systems to Windows 2000. Will Smartcam version 11.5 > > be > > > compatible? > > > > > > Thanks in advance for any replies. > > > > > > Steve Rushton > > > > > > Cnc Programmer > > > PGM of New England > > > Manchester NH