Try the Arc To Hole utility found on the SmartCAM v11 CD at
D:\TEC_SUPP\UTILITY\ARC2HOLE\
=============================================
Fred Lauzus, CAM Programming Coordinator
High Steel Structures, Incorporated
mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
http://www.highsteel.com <http://www.highsteel.com/>
=============================================
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 7:30 AM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] group selecting 1135 holes
All,
I have a 9" plate with 1135 holes to center drill then drill. Is there
any fast way or macro to select all the hole and add the tools to them. I
have tried to group and select holes and the center point is placed on the
start point of the arc, not the center of the hole.
Any help would be greatly appreciated
Jim
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
