Chris, It did this time. I don't see your ProTrak post from the 20th, so I think you're right about the bounces. - John
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 24, 2002 1:07 PM Subject: [mfg-smartcam] Is this getting through? - Posting in .0005" increments > Is this getting through? I'm not sure if our server is bouncing my post > because of the attachments, so I zipped them this time. > > -----Original Message----- > From: Chris Kocourek > Sent: Tuesday, September 24, 2002 6:46 AM > To: Smartcam Forum (E-mail) > Subject: Posting in .0005" increments > Importance: High > > > Hi group, > Re-posting this. The main problem is getting SmartCam to output g-code in > .0005" increments. > Can anyone help? > > Chris > > -----Original Message----- > From: Chris Kocourek > Sent: Friday, September 20, 2002 2:48 PM > To: Smartcam Forum (E-mail) > Subject: Proto Trak g-code posting problem > Importance: High > > > Hi all, > We own a couple of Proto Trak MX2 machines, with which we use SmartCam to > program. They are strictly 2 axis machines with a minimum axis movement > increment of (.0005). There's a problem which needs to be debugged which > pops up every once and a while. > When pocketing "odd-shaped" pockets (see the attached files), the MX2 > control spits out an error to the effect that there's a connecting radius > error. I seem to remember solving this problem a couple of years ago by > changing the SMF question #21 to ".0005" (minimum increment). I lost that > SMF file when we switched pc's at this workstation. > Anyway, Our g-code is still being output with tenth increments even though I > changed the SMF question. I think this is the cause of the connecting radius > error. Any idea why our g-code is not being output in .0005" increments? > > > > Chris Kocourek > > > > Tool Design Engineer > > FLEXTRONICS > > > > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
