Group,
I received this today from Visualmill. I bought Visualmill last
year and it is an excellent package. More and better roughing routines
than Smartcam, better tool library management, and lots more. THIS is
a great opportunity to get a great alternative to Smartcam at a really
affordable price. Excuse me for forwarding this through the group but
it is just too good to not mention here.
Rhino & Visualmill 4.0 for $1495.00 (read below)
Michael
..[paste]....
September 29, 2002
Dear Valued Customer
As a valued customer of ours we want to let you know that our newest
product, VisualMill v4.0 has just been released (please see attached
Press Release).
For current customers of VisualMill v3.0 eligible to upgrade to v4.0,
the product download is currently available at our website,
www.mecsoft.com. Eligible customers include customers that have paid
the yearly maintenance fees and also any customer that purchased
VisualMill v3.0 within the past 90 days. We will begin shipping this
product to these eligible customers starting October 30, 2002.
I would also like to take this opportunity to let you, our customers
to be the first to know that MecSoft Corp. will be announcing on
Monday Sept. 30, 2002 a special bundled product offering called
�RhinoCAM� (please see attached Press Release). We have entered into
a strategic partnership with Robert McNeel and Associates, makers of
Rhinocerous 3D� to offer RhinoCAM (VisualMill v4.0 and Rhino 3D) for
$1495.00 USD when purchased together, for the first five hundred
customers. Current Rhino customers can purchase VisualMill v4.0
separately for $995.00 USD while this offer lasts.
As a consideration to our existing customers, we are offering to you
an opportunity to purchase these products at the above-mentioned
prices. If you have need of another seat of VisualMill, or have been
looking at Rhino 3D, here is you chance to receive them both for
$1495.00 USD (not including shipping charges or any taxes that may
apply). If you wish to buy VisualMill v4.0 separately, you can
purchase it for $995.00 USD while this offer lasts.
Additionally to our current VisualMill 3.0 users who are not eligible
to upgrade to VisualMill 4.0, we are offering an upgrade price of $600
to allow them to upgrade to VisualMill 4.0. This special price will
be available only while this offer lasts.
We recognize that as a customer of ours, you are our most important
asset and we look forward to a long-term successful relationship
between our respective companies.
Best Regards,
Joe Anand
President
MecSoft Corporation
17905, Sky Park Circle, Suite N
Irvine, CA - 92614
(949)-654-8163 x102
(949)-654-8164 (Fax)
http://www.mecsoft.com
mailto:[EMAIL PROTECTED]
--
Michael Gailey
Artistic CNC Mill, Router and Engraver Programming
3D modeling for Product Design and Development
http://www.microsystemsgeorgia.com/toc.htm
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
