|
Help,
I'm running the same tool back to back from P0009
to P0001 and the machine
gives an error because it sees the same stand by
tool at the beginning of each.
I want to put in an M33 at the end of P0009 but my
post won't let me.
I tried putting it in like this: #IF(#WKPLN=9)< M33> with no
luck.
I can put it in like this at the beginning and it
works fine but not at the end.
I already have a #IF statement at the end and this
would be a #IF inside of a #IF.
Is that the problem?
How can I get the M33 after the M107 to output
only after P0009?
Any help is appreciated.
#EVAL(#BLKDEL=0)
M107 #IF(#WKPLN=9)< M33> M01 M99 Jeff Pieper
EATON
Hydraulics
|
