Thanks Fred. This will definitely get me started in the right direction. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 7:04 AM To: [EMAIL PROTECTED] Subject: RE: [mfg-smartcam] Macro inspiration
This should get you started. The attached macro is a demonstration of extracting the text string from a user command or text element. In the current state the macro will prompt for the element number. If the element entered is a user command or text element, the macro will extract the text string and assign it to the string variable #UserText. The macro will then display the text using a "Pause" message box. ================================================== Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> http://www.highsteel.com <http://www.highsteel.com/> ================================================== -----Original Message----- From: Michael Senack [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 4:34 PM To: 'SmartCAM Users Group ([EMAIL PROTECTED])' Subject: [mfg-smartcam] Macro inspiration I'm looking for some ideas to start a macro for automatically changing User Elements. Attached is an Advanced Wire EDM .PM4 program for our Agie wire EDM machine. The program is intended for the Agie 100 control. However if that machine is tied up, I have to reprogram it to the HS150 Agie by modifying the following user elements manually. Modify Element 3 from #DOFF=15,#TOOL=1 to #DOFF=15,#TOOL=1,#V1=16,#V2=1 Modify Element 26 from #DOFF=1,#TOOL=1 to #DOFF=1,#TOOL=1,#V1=16,#V2=1 Modify Element 41 from #DOFF=2,#TOOL=1 to #DOFF=2,#TOOL=2,#V1=16,#V2=2 Modify Element 56 from #DOFF=3,#TOOL=2 to #DOFF=3,#TOOL=3,#V1=16,#V2=3 Is it possible to check if the element is an User Element that is #DOFF=1,#TOOL=1 then if it is change it to #DOFF=1,#TOOL=1,#V1=16,#V2=1 ? Any ideas to get me started are greatly appreciated. Regards, Michael Senack ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
