A couple of things to check: Can you jog the indexer manually from the control? If not, there may not be a good connection to the indexer. Are there any parameters in the control that need to be set to accept the indexer commands? Is there an interface board that may have been removed? Or not functioning?
Chuck Glawe Courtesy Corporation Mold & Tool Div. mailto:[EMAIL PROTECTED] http://www.courtesycorp.com -----Original Message----- From: Jeff [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 26, 2003 11:47 PM To: Smartcam User Group Subject: [mfg-smartcam] Haas indexer's Hi group, This is not a SmartCAM question but I was hoping someone might know this. We just put a Haas indexer on a Cincinnati Arrow 750 with the A2100 control and I can't get it to rotate. I have the indexer setup to activate with an M77 and a B rotation. I'm not getting an error but it doesn't index either. Does anyone know what I need for this to work? Jeff Pieper EATON Hydraulics ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
