Re: [mfg-smartcam] FW: right angle programming

[Dave Wolfgang]

Change your work shifts, would be the only way I would know how to. You could work on your tmp file to change you axes names.     Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, September 17, 2003 2:45 PM Subject: [mfg-smartcam] FW: right angle programming Hi all,   I sent this on the 10th, but never saw it come up in the forum. Did anyone else receive it? Next, can anyone help with my questions in my original post? The attached zip file contains an R12 .dxf drawing I drew.   Chris     -----Original Message----- From: Chris Kocourek Sent: Wednesday, September 10, 2003 10:46 AM To: 'Smartcam Forum (E-mail)' Subject: right angle programming Hi all,   My company purchased a right angle head attachment, and we are now figuring out how to program it. Attached is a crude drawing I made to illustrate programming on different workplanes, at least how I see it.   - Is my drawing correct, or should I approach programming the 4 sides in a different manner?   - How do I set up my workplanes and tmp file to produce correct code?   - Will tool motion/direction display correctly in Showcut?       As always, thanks for any help or advice you can provide.   Regards,   Chris Kocourek Tool Designer FLEXTRONICS CTC

CHRIS.pm4
Description: Binary data

CHRIS.jof
Description: Binary data

CHRIS
Description: Binary data