I was wondering if someone might know how to change a X-6.0 Y0.5 Z-0.7875 R-16.4 W.5 F2.8 H4 to a positive rather than negative you see I'm using one Work Plane the XY Plane and half my part is in the positive position from -Z- Axis and the other half is in the negative position from the -Z- Axis as the center of the part is the XY Plane then I set up a Different work plane for each end of the part so this is what it posts like see sample below. The parts are 33" long so the top of the part is 16.5 in -Z- above the XY plane each H# is a different part 3parts total so 6 ends.
:G0 G70 G90 T240 M6 B0 (MSG,1.620 DIA. BORE) X6.0 Y0.5 S700 M3 T240 H3 Z16.7 M8 G85 Z-0.7875 R16.6 W.5 F2.8 H3 X0.0 Y0.5 Z-0.7875 R16.6 W.5 F2.8 H2 X-6.0 Y0.5 Z-0.7875 R16.6 W.5 F2.8 H1 G0 Z20 H0 B180 G80Z16.7 G85 X-6.0 Y0.5 Z-0.7875 R-16.4 W.5 F2.8 H4 X0.0 Y0.5 Z-0.7875 R-16.4 W.5 F2.8 H5 X6.0 Y0.5 Z-0.7875 R-16.4 W.5 F2.8 H6 G0Z20.0 M1
<<attachment: winmail.dat>>
